background image

 

 

 

DANGER

  

Danger of electrocution!

 

All works on the device may be performed only by a qualified and licensed electri-

cian. Observe national regulations. 

 

Any works introducing changes into the configuration must be always performed with 

disconnected voltage. 

 

Choosing a Suitable Location

    

1. Do not locate the Module facing direct sunlight, humid or dusty place.

 

2. The suitable ambient temperature for the Module is 0°C~40°C.

 

3. Do not locate the Module where exists combustible substances or any source of 

heat, e.g. fires, radiators, boiler etc.

 

4. After putting it into use, the body of Module will become a little bit hot of which phe-

nomenon is normal.

 

 

Warning: 

 

1.  This device must be installed by qualified personnel;  

2.  This device must not be installed directly outdoors;  

3.  Installation consists of mounting the device, connecting to an IP network, 

connecting the relays, providing power and configuring via a web browser.  

 

Box mounting

 

 

Mounting the device to DIN rail

 

Smart Home DIN rail box 

can be mounted to a standard (210mm x 90mm x 78mm) 

DIN rail. Attach the module to the DIN rail by hooking the hook on the back of the 

enclosure to the DIN rail and then snap the bottom hook into place.

 

 

Disposal

 

 

1.

 

 

This marking indicates that this product should not be disposed with other 
household wastes throughout the EU. To prevent possible harm to the 
environment or human health from uncontrolled waste disposal, recycle it 
responsibly to promote the sustainable reuse of material resources. To return 
your used device, please use the return and collection systems or contact the 
retailer where the product was purchased. They can take this product for 
environmental safe recycling

 

 

FCC Interference Statement

 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. 

 

These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. 

 

This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. 

 

However, there is no guarantee that interference will not occur in a particular installation. 

 

If this equipment does cause harmful interference to radio or television reception, which

 

can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one of the following measures:

 

• Reorient or relocate the receiving antenna.

 

• Increase the separation between the equipment and receiver.

 

• Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.

 

• Consult the dealer or an experienced radio/TV technician for help.

 

This device complies with Part 15 of the FCC Rules. Operation is subject

 

to the following two conditions:

 

(1) This device may not cause harmful interference, and

 

(2) This device must accept any interference received, including interference that may cause 
undesired operation.

 

Summary of Contents for PAN27










Reviews: