k
P O W E R D I S T R I B U T I O N P A N E L S S E R I E S 2 0 0
INSTRUCTION MANUAL
INTRODUCTION
The Power Distribution Panels Series STV 200 are designed for the distribution and
protecting of the electrical 12/24V DC system. At the front panel there are circuit breakers,
control switches, monitoring displays and sockets (depending on type).
Each circuit is switched and protected by a thermical circuit breaker with rocker switch.
It`s integrated light diode is showing the circuit status. In case of a short, the breaker
switches automatically off and the light goes off.
Some models are equipped with additional battery voltage meters and/or tank gauges.
The additional current meters inform about the actual flowing discharge current.
Each panel comes with a set of self-adhesive labels, which can be placed at each circuit
breaker on the signed fields.
The Power Distribution Panels Series STV 200 can only be used at low voltage DC 10-28V.
They were designed for use on yachts or camper vans and must be used in an enclosed
environment which is protected against rain, moisture, dust and condensation.
Do not use the Power Distribution Panels Series STV 200 in places where there could be
danger of explosion by gas or dust. They`re not designed to be installed outside!
philippi elektrische systeme gmbh
www. philippi-online.de
Neckaraue 19
info@philippi-online.de
D-71686 Remseck am Neckar
Telefon: +49 (0)7146/8744-0, Fax -22
