Need Help? Call us at 1.800.54.AVENT or visit www.aventamerica.com
Assembling the ISIS Manual Pump
17
Assembling the ISIS Manual Pump
Wash and sanitize all parts before use. See section titled
‘Cleaning the ISIS Manual Pump’ on page 15.
18
1
Wash your hands thoroughly. Click the white
valve into the pump body so that it fits
securely into the small round hole. Make sure
the pointed side of the valve is facing down.
2
3
Twist the reusable base onto the pump
body until securely in place. To ensure
the pump is completely stable, insert
the pump base into the stand.
4
Fit the Let-down Massage Cushion
™
onto the
pump funnel. Secure the rim of the Let-down
Massage Cushion around the funnel, so that
there are no gaps.
(This is easier if assembled
while the Let-down Massage Cushion is wet.)
5
Place the forked end of the handle
under the rounded tip of the
diaphragm stem. Push down gently
on the handle until it clicks into place.
6
Click the pump cover onto the pump body.
Fit the silicone diaphragm into the pump
body. Ensure a perfect seal around the rim by
pressing down with your fingers.
(This is easier
if assembled while the diaphragm is wet.)
white stand
