12
DDC Instructions (Continued)
109P2 GS3 CM25
How to change the Year, Week & Serial
number of Monitor [for PHILIPS(PCEC)
models]
Use arrow keys to highlight "Barcode format", under the Setup menu,
press "Enter".
Bring up :
Barcode example
: 003412345678
Barcode format
: YYWWSSSSSSSS
continued: Barcode example
: 003412345678
Barcode format
: YYWWSSSSSSSS
----------------------------------------------------------
Manufacture Year
: 1999
Manufacture Week
: 34
Serial No.
: 12345678
Serial No. ASCII
: _ TY _ _ 12345678
================================
EDID [16] Week
: 22
EDID [17] Year
: 09 [Year-1990]
EDID [12..15]
: 00bc614e
EDID [77 -89]
: TY
data correct ? (Y/N) Y
There is a description at the lower of the screen for Barcode format as
below.
Barcode format : Y,W,S,X,- (year,week,s/no,ignore,fixed)
Y stands for "year".
W stands for "week".
S stands for "s/no (serial number)".
X stands for "ignore". Allow user to fill in any 'character' or 'numeric'.
- stands for "fixed". User have to fill in Special 'character' or 'numeric'
for "AutoScan" if user fill in '-' at "Barcode format :".
Use arrow keys to highlight "Auto Scan" under the R/W menu, press
"Enter".
Bring up: Auto Scan
year, week, serial
number can be
changed.
Serial Number
Year Code
Week Code
don't care
(If monitor is not at Factory Mode, access Factory Mode at
this moment.)
Fill in "Barcode data (for instance: 003412345678)" beside AutoScan,
press "Enter".
After 10 seconds around, bring up:
File R/W
Setup
Quit
Write EDID to EEPROM
Read From EEPROM
Edit EDID Code
Auto Scan
----------------------------------------------------------
¬
Fill in 993412345678, press "Enter"
Fill in YYWWSSSSSSSS, press "Enter"
Fill in "Y", don't press "Enter"
¬
¬
¬
Press "ESC" "ESC", return to R/W menu.
Select "Edit EDID code", press "Enter".
Verify "ID Serial No.".............
Turn off monitor, then turn on monitor again.
Press OSD button, select "MONITOR STATUS", press OSD button
again.
Verify "SERIALNO".
(Leave OSD function).
Use arrow keys to highlight "QUIT", press "Enter".
*
*
press "space"
TY
Factory writing ...100% (58) (f8) (7f) (12).
Factory code for each site is as below.
Brazil
H C (48h,43h)
Chungli
T Y (54h,59h)
Delta
G K(47h,4Bh)
Juarez
Y A(59h,41h)
Shenzshen
C X(43h,58h)
Suzhou
BZ (42h,5Ah)
Szombathely HD (48h,44h)
9
Go to cover page
Forward
Back
