Philips 1250X/40 Manual Download

Page: 20 / 22

ENGLISH

Replacing the Shaving Unit

◗

Replace the shaving unit once a year for

optimal shaving results.

◗

Replace damaged or worn razor heads with

model RQ12 Philips Norelco razor heads only.

◗

The individual shaving heads (cutters and

combs) are NOT replaceable. Only the

one-piece shaving unit can be replaced.

Replacement Razor Head Assembly

Indication

◗

The replacement head indicator symbol starts

to blink and you will hear a beep (models

1290X, 1280X and 1280XCC) to remind you

to check if it's time to replace your shaving

unit to obtain optimal shaving results.

This razor/charging stand/Jet Clean System has no

other user-serviceable parts. For assistance call

1-800-243-3050.

Maintenance

◗

Always remove razor from the charging stand/

Jet Clean System before cleaning appliance.

◗

Unplug the charging stand/Jet Clean System

after charging/recharging or cleaning razor.

The charging stand/Jet Clean System and razor

may be wiped clean using a damp cloth.

◗

Water from the tap should be on a warm

setting to clean any washable parts.

Note: DO NOT place or clean any parts of the

charging stand/Jet Clean System in a dishwasher.

Storage

◗

The razor can be placed in the charging stand/

Jet Clean System for safe storage. Remove the

plug from outlet as soon as the razor is fully

charged or cleaned.

◗

If appliance will not be used for an extended

period of time, it is recommended that the

cleaning solution in the Jet Clean canister be

emptied out before storing.

◗

Be sure razor is turned off. Remove cord from

outlet and charging stand or Jet Clean System

before storing in a safe, dry location where

it will not be crushed, banged, or subject to

damage.

◗

Do not wrap cord around razor/charging

stand or Jet Clean System when storing.

◗

Store cord in a safe location where it will not

be cut or damaged.

◗

Do not keep charging stand or Jet Clean

System permanently plugged into outlet.

◗

Do not place or store charging stand/Jet

Clean System where it can fall or be pulled

into a tub or sink, water or other liquid while

plugged in.

◗

If storing razor in the charging stand, put

the Protective Razor Head Cap on razor to

protect heads.

MINUTES LEFT

Summary of Contents for 1250X/40























Search results

Summary of Contents for 1250X/40

Reviews:

Related manuals for 1250X/40

Brands by name

Popular brands

Philips 1250X/40, Manual

Search results

Summary of Contents for 1250X/40

Reviews:

Related manuals for 1250X/40

Brands by name

Popular brands