background image

14

15

ENGLISH

 

  Remaining Battery Capacity

C

  Models 1290X, 1280X and 1280XCC

-The remaining battery capacity is indicated by 

the number of shaving minutes shown on the 

display. 

 

C

  Models 1260X, 1250X and 1250XCC

-The remaining battery capacity is indicated by 

the blinking charging lights.  

 

  Low Battery Indicator

Models 1290X, 1280X and 1280XCC

-When the battery is almost empty (5 or less  

shaving minutes left), the minutes indication 

blinks. When you turn the razor OFF the minutes 

indication continues to blink for a few seconds. You 

will hear a beep when there are no minutes left. 

C

  Models 1260X, 1250X and 1250XCC

-When the battery is almost empty (5 or less  

shaving minutes left), the bottom charging light 

blinks orange. When you turn the razor OFF the 

bottom charging light continues to blink orange 

for a few seconds.

NOTE: The displays of models 1260X, 1250X and 

1250XCC look different, but work the same way.

C

 

  Replacement Shaving Unit Indicator

Every year, depending on your shaving behavior,  

after turning the razor OFF, the replacement  

 

 

ENGLISH

 

shaving unit symbol indicator starts to blink. For 

models 1290X, 1280X and 1280XCC, you will 

also hear a beep.  The replacement shaving unit 

symbol will remain visible for the next 7 shaves to 

remind you that with new shaving heads you will 

guarantee yourself optimal shaving performance. 

C

  ◗

  Blocked Shaving Heads Indicator

 

If the display shows a blinking replacement 

 

shaving unit symbol and faucet symbol with 

 

exclamation mark, clean the razor thoroughly 

 

before continuing to shave (see ‘Cleaning’).  

 

After cleaning, if the blinking replacement shaving 

 

unit symbol and faucet symbol with exclamation 

 

mark remain on the display, immediately replace 

 

the shaving unit (see ‘Replacing the Shaving Unit’).

C

 

  Cleaning Indicator

For optimal shaving performance, we  

recommend cleaning the razor after EACH use.  

The blinking faucet symbol will remind you the  

shaving unit needs to be cleaned.  This happens 

after each shave. 

NOTE: The displays of models 1290X, 1280X, 

1280XCC, 1260X, 1250X and 1250XCC look 

different, but work the same way.

 

  Power-saving mode (1290X only)

The razor is equipped with an automatic power-

saving mode. When the razor enters the power-

saving mode, the light in the on/off button goes 

out to save energy.  

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

MINUTES LEFT

Summary of Contents for 1250X/40























Reviews: