background image

4

Quick installation

Program sort

Program name

The first time you switch on the television, a
menu appears on the screen and the tuning
starts automatically.

If the menu is not displayed, press and hold down
the 

- and 

+ keys on the TV set for 5

seconds to start the tuning.

All the available TV programs and radio stations

*

will be stored. This operation takes a few

minutes.The display shows the progress of the

search and the number of programs found.
At the end of the search, the menu disappears.

To exit or interrupt the search, press 

H

.

If no program is found, consult the possible solutions
p. 12.

&

If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the
installation is complete.

é

If this is not the case, you need to use the
Sort menu to number the programs correctly.

Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the 

îÏ

keys and validate with 

¬

.

* Only on versions equipped with a radio.

&

Press key 

H

.The Main menu is displayed on

the screen.

é

With the cursor, select the Install menu
followed by the Sort menu.

Select the programme you want to move using
the 

îÏ

keys and press 

¬

.

Then use the 

îÏ

keys to select the new

number and validate with 

È

.

(

Repeat steps 

and 

for each program you

wish to renumber.

§

To quit the menus, press 

d

.

If required, you can give a name to the
programmes and external connectors.

Note: on installation, the programs are named
automatically when an identification signal is sent.

&

Press the 

H

key.

é

With the cursor, select the Install menu, then
Name

Use the 

îÏ

keys to select the programme

to name or rename.

Use the 

Ȭ

keys to move around the

name display area (5 characters) and the

îÏ

keys to select the characters.

(

When the name has been entered, use the

È

key to exit.The name is stored.

§

Repeat steps 

to 

(

for each programme

you wish to name.

è

To quit the menus, press 

d

.

Auto Store

•  Program

2

•  TV

470 MHz

•  ••••••••••••••••••••••••••••••••

Main

ge

• Picture
• Sound
• Features

$

Install

Install

• Language
• Country
• Auto Store
• Manual Store

$

Sort

Æ

• Name

00   
01   TF1
02   FR2

03

Æ

FR3

04   C +
05   ARTE

Summary of Contents for 14PT1686/01P

















Reviews: