- 4 -
OFF
BDS Hotel Mode is OFF:
The TV operates as a normal consumer TV
SWITCH ON VOL
When the user switches the TV ON, it will play at the specified volume level. There are 2 options:
LAST STATUS
Upon start-up, the TV volume will be set to the level before the TV set was
last turned off.
USER DEFINED
As specified by installer
Remark:
“SWITCH ON VOL” cannot exceed the MAXIMUM VOL level. This is the volume level with which
the Hotel Mode Setup menu was entered.
MAXIMUM VOL
The TV Volume will not exceed the selected volume level.
SWITCH ON CHANNEL
When the user switches the TV ON, it will tune to the specified channel. There are 2 options:
LAST STATUS
The TV will switch on to the last channel that was shown before the TV set
was turned off
USER DEFINED
Any analogue channel can be chosen to be the first channel to switch on
POWER ON
The Power On function allows the TV to enter a specific mode of operation (On or Standby) after the mains
power is activated.
ON
When set, the TV will always turn ON after the mains power is enabled.
STANDBY
When set, the TV will always turn to STANDBY after mains power is enabled
LAST STATUS
When set, the TV will always turn to the last power status before the mains power was
disabled.
DISPLAY MESSAGE
ON
Enables display of the Welcome Message for 30 seconds after the TV set is turned on
OFF
Disables the display of the Welcome Message.
If OSD DISPLAY is set to OFF, then the Welcome Message is automatically disabled.
WELCOME MESSAGE
The Welcome Message function allows the TV to show a customized greeting to the hotel guest whenever the
TV is switched on. This helps to personalize the hotel experience for guests.
The Welcome Message can consist of 2 lines of text, with each line containing a maximum of 20 alphanumeric
characters. Use the Remote Control arrow keys to create the Welcome Message.
To enable the display of the Welcome Message, the DISPLAY MESSAGE option must be ON
To clear the Welcome Message from the TV’s memory, select
CLEAR
LOCAL KEYBOARD LOCK
ON
The television keys /-, P/- and MENU are blocked.
OFF
The television keys /-, P/- and MENU function normally
ALL
The television keys /-, P/-, MENU and POWER are blocked.
REMOTE CONTROL LOCK
ON
Standard Remote Control keys are disabled.
OFF
All Remote Control keys will function normally.
OSD DISPLAY
ON
Normal screen information is displayed (e.g. programme information)
OFF
Screen information is suppressed.
