- 5 -
HIGH SECURITY MODE
ON
Allows access to the BDS Hotel Mode Setup Menu via the special BDS Setup Remote only.
(RC2573/01)
OFF
Allows access to the BDS Hotel Mode Setup Menu via BDS Setup Remote or via normal Remote
Control (using special key code sequence).
AUTO SCART
The Auto Scart function enables auto-detection of AV devices that are connected to the TV’s Scart connector.
ON
Enables Auto Scart switching in BDS Hotel Mode.
OFF
Disables Auto Scart switching in BDS Hotel Mode.
MONITOR OUT
ON
Allows audio & video output from TV via relevant AV connectors (if available).
OFF
Disables both Audio & Video output from the TV (to prevent illegal copying).
BLANK CHANNEL
The Blank Channel function disables the display of video on the TV, but does not affect the audio output. This
function can be used for audio applications (example: Off-air radio transmission, music channels, and so on),
which do not necessarily require the display of video.
ON
The current programme is blanked
OFF
The current programme is not blanked (normal visible; DEFAULT value)
BLANK CHANNEL can be set for every channel. Use
[P+
/
P-]
to go through all the programmes and set the
desired status per channel. The programme number is visible in the top left corner.
Low Battery Check
This television set has a special feature which checks the battery power level of a TV Remote Control, and
indicates if the battery is low and requires changing.
(Note: The Low Battery Check function works only with certain models of Remote Controls. Please check
with the Philips sales representative if the Remote Control used with this TV supports this function)
To activate the Low Battery Check function, hold the TV Remote Control in front of the TV, and
press and
hold
the
OK
button on the Remote Control for at least 5 seconds. A message will appear on the TV screen to
indicate if the battery power level is OK, or if it is Low. If the message indicates that the battery level is low, it
is recommended to change the batteries of the Remote Control immediately.
5.
Cloning of settings
Cloning of analogue TV channels and TV settings as described in the chapter
Hotel Mode Set-up menu
For 15/20HF5234
o
Wireless cloning with the SmartLoader 22AV1120 or 22AV1135
o
Cloning off all adjustable TV se analogue channel table
For 20/26/32HF5335D
o
Wired cloning with the SmartLoader 22AV1135 using the wire packed with the SmartLoader
o
Cloning off all adjustable TV se analogue channel table (digital channel table via automatic
installation)
Instruction for cloning of settings between TVs
Philips SmartLoader (22AV1135/00)
The Philips SmartLoader is an installation tool especially designed for easy and fast installation and copying of
TV settings on Philips Institutional TV’s.
