background image

 

 

 

In this sub menu, the Control settings of the TV can be configured. 

 
 

• 

ESP:

 Energy Saving Programmability Mode 

(ESP) controls the maximum continuous viewing 
time allowed by the control system. The ESP 

Menu function is shown as "ESP", and its valid 
values are 00 - 99 (in hours). 00 value means 

OFF. 

• 

Audio/Video Mute:

 The Audio/Video Mute 

menu function determines whether the video 
should be blanked and the audio muted, if the 

currently tuned channel has no signal. 

• 

Source Menu Item: 

Toggle between 

“YES/NO” to enable or disable selection of the 
TV Source Input via the guest Setup menu when 

using the guest Remote Control. 

 

 

 
 

 
 

 
 

 
 

 
 

 

• 

Channel Guide: 

Select “YES” to allow the Channel Guide Menu to be displayed if the “Channel Guide” button 

is pressed on the guest Remote Control. Select “NO” to disable this feature.

 

• 

Min Volume:

 This item sets the limit for minimum volume allowed for the television set. Use the Right/Left 

cursor buttons to adjust. 

• 

Max Volume:

 This item sets the limit for the maximum volume allowed for the television set. Use the 

Right/Left cursor buttons to adjust. 

• 

Audio Out Volume: 

Set the volume of the external audio output (e.g. bathroom speaker). This volume is 

independent of the main speaker volume level. 

(*Note: Available on certain models only).

 

 

 
 

 

 

In this sub menu, the Close Caption and V-Chip settings of the TV can be configured. 

 
 

• 

Save CC

: This menu item sets the option of 

saving the Close Caption selection to “Yes” or 
“No”. 

• 

CC:

 This menu item allows selection of Close 

Caption channels, or to turn Close Caption 

“OFF”. 

• 

Saved V-Chip:

 This menu item sets the option of 

saving the V-Chip selection to “Yes” or “No”. 

• 

V-Chip Menu Item:

 This menu item sets the 

option of toggling the V-Chip Menu Item to 
“Yes” or “No”. 

• 

V-Chip Setup:

 This sub-menu allows the setting 

and disabling of Movie and TV ratings for the V-
Chip.

 

 

 

- 7 - 

Summary of Contents for 20FT3310
















Reviews: