Philips 20PFL3931/V7, User Manual

EN 15

4.5 More about MHL

MHL is interface for transmitting digital 
audiovisual signals from mobile phones to
supported television sets. Note that it only
supports MHL ctemobile phones. To
support the MHL in your, kindly check the
operation manual of your phone.
when smart phone is to HDMI (MHL) port 
of the TV with standard M cable, the 

mobile screen is displayed on the TV 
screen and some of mobile applications
can be operated by TV remote control.

How to use MHL

1) Connect MHL enabled phone with the
    passive MHL cable (not supplied with   
    TV set) to HDMI1 port of TV.
2) Go to HDMI1 source with AV/TV key or
     remote control.
3) MHL selected as Auto then phone 
    screen displayed on the TV screen.

1) Use standard certified MHL cables to
get desired connectivity results. If some 
problem occurs in connecting your device 
in MHL mode, then check your device
settings or consult your MHL phone 
service center. Some mobiles use 5 pin
cable and some mobile use 11 pin cable
so, kindly choose proper MHL mode.
2) Depending on version, some MHL
devices may not accept TV remote control
commands.
3) MHL cable is not provided with TV set.
You need to buy separately.
4) Cannot do typing with TV remote 
control. For this you can use blue tooth 
compatible keyboard/mouse available in
market.
5) As the TV screen is big & its resolution
is more than phone, the video quality may
be lower in TV. So if any problem in video 
quality please check content resolution of
your device.

ARC enables the digital sound to be the
output just using single HDMI cable 
connected to ARC ebabled Home Theater

system player; However ARC is only 
available through HDMI3 port of TV.

How to use ARC

1) Connect ARC enabled AV received 
    (Home Theater) through high speed   
    HDMI cable (HDMI 1.4 cable) to HDMI3 
   port of the TV.
2) Then go to settings menu of TV set ARC
    function “ON”.
3)Set ARC mode in connected player.
4) When ARC is set ON, then the TV 
    speaker will be deactivated & volume 
    source (any TV source) is routed to Home
    theater.

We have provided unique USB to USB
file transfer feature. To use this feature use
following steps below:
1) Connect one USB to each USB port of
     the TV.
2) Go to multimedia by pressing TV/AV key
    on remote or keypad.
3) Select either Picture, Music, Movie or 
    Text option in multimedia source 
    depending upon file to be transferred.
4) Select USB - DISK 1 or DISK 2, from
    which you want to copy data  and open it.
5) Go to the file to be copied and press the
‘Yellow’ favorite key on remote to ‘Copy’.
6) Select USB DISK 1 or DISK 2, in which 
    you to paste the copied file.
7) Press ‘Green’ favorite key on remote to
    ‘Paste’.
8) ‘Copying, please wait!’ message and 
     progress bar will be displayed as the copy

      Paste

       operation is being performed.

4.6 More about ARC

4.7 More about USB TO USB

9) After copying is successful, ‘Copy 
    Success message is displayed.

       NOTE:-

1) Copy time will vary depending upon file
size. larger files will need more time.
2)Multiple files can be copied at a time.
3) Copied file will be presented in USB
from which files was copied. It will not be
‘Cut - Paste’.
4) The USB to USB file transfer will not be
performed if receiving USB does not have
enough space.
5) NTFS HARD DISK cannot support write
and delete in USB to USB transfer.
6) Boot logo image can not read from 
NTFS HARD DISK

NOTE: