15
English
EN
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T
digital broadcasts. With digital broadcasts,
you have the additional option of selecting a
preferred subtitle language.
Enable subtitles on analogue TV
channels
1
Select an analogue TV channel.
2
Press
TELETEXT
.
3
Enter the three-digit page number of the
subtitle page with the
Numeric buttons
.
4
Press
TELETEXT
to switch off Teletext.
5
Press
SUBTITLE
.
The
»
[Subtitle mode]
menu appears.
6
Select
[On]
to display subtitles always or
[On during mute]
to display subtitles only
when audio is muted.
7
Press
OK
to enable subtitles.
Note
Repeat this procedure to enable subtitles on
•
each analogue channel.
Tip
Select
•
[Subtitle mode]
>
[Off]
to disable
subtitles.
Enable subtitles on digital TV channels
1
When watching digital channels, press
SUBTITLE
.
The
»
[Subtitle mode]
menu appears.
2
Select
[On]
to display subtitles always or
[On during mute]
to display subtitles only
when audio is muted.
3
Press
OK
to enable subtitles.
1
Press
MENU
.
2
Press
to select
[Setup]
>
[Features]
>
[Sleep timer]
.
The bar appears..
»
3
Press to set the sleep time.
The Sleep timer can be up to 180
»
minutes in steps of five minutes. If set
to zero minutes, the Sleep timer is
switched off..
4
Press OK to activate the Sleep timer.
The TV switches to standby after the
»
pre-defined period of time.
Alarm (On timer)
You can switch the TV to a specified channel
at a specified time, from standby or power-on
mode.
1
Press
MENU
.
2
Press
to select
[Setup]
>
[Features]
>
[On timer].
3
Press OK or to enter the
[On timer]
menu.
[Activate] Selects the frequency to
•
[Off]
or
[Once]
or
[Daily]
.
[Time] Sets the starting time to switch
•
on the TV automatically.
[Programme
•
no.]
Selects the channel.
4
Press
EXIT
to exit.
Tip
Select
•
[On timer]
>
[Activate]
>
[Off]
to
disable
[On timer]
.
Refer to page 32
•
“How to set the TV alarm?”
for more details about TV alarm.
