29
English
EN
[Low power standby (Green / Fast)]
Defines the power mode when TV enters to
standby by pressing remote control power button
or TV local power button.
[Fast]:
•
When set, the TV will enter semi-
standby mode to achieve fast powering
up.
[Green]:
•
When set, the TV will enter
low standby power mode to achieve
minimum power consumption.
[Power on]
The power on function allows the TV to enter a
specific mode (
[On]
,
[Standby]
, or
[Last status]
)
of operation after the mains power is activated.
[On]:
•
When set, the TV will always turn
on after the mains power is activated.
[Standby]:
•
When set, the TV will always
turn to standby after the mains power is
activated.
[Last status]:
•
When set, the TV will
always turn to the last status (either On
or Standby) whenever the mains power
is activated.
[Smart power]
Adjusts the picture backlight to achieve the
following power saving mode.
[Off]:
•
Smart power is disabled. ( Vivid
mode is applied).
[Low]:
•
The picture backlight is at low
power saving mode. (Movie mode is
applied).
[Medium]:
•
The picture backlight is at
medium power saving mode. (Standard
mode is applied).
[High]:
•
The picture backlight is at high
power savings (Energy saving mode is
applied).
[Display message]
[Off]:
•
Disables the display of the
welcome message.
[On]:
•
Enables the display of the welcome
message for a pre-defined time after the
TV turns on from standby or off.
Note
•
Selects
[Welcome message]
≥
[Message
time-out]
to set the period of time to
display the welcome message.
[Set ID]
(Only available in
[Signage]
mode). This function
allows installer to designate a serial ID number for
each TV. Through the ID number, the installer can
control each TV by using RS232-device-chaining.
Switch on volume
When the guest switches the TV on, it will play at
the specified volume level.
[Last status]
•
: If
[On]
is selected, the TV
will be automatically switched to the
last volume status whenever the mains
power is turned on. (The volume level
can not exceed the
[Maximum volume]
level).
[User defined]
•
: (Only appears when you
select
[Last status]
≥
[Off].
)The guest
can adjust his/her preferred switch on
volume level.
Switch on channel
When the guest switches the TV on, it will play at
the specified channel.
[Last status]
•
: If
[On]
is selected, the TV
will be automatically switched to the
last channel status whenever the mains
power is turned on.
[User defined]
•
: (Only appears when you
select
[Last status]
≥
[Off]
). The guest
can choose his/her preferred switch on
channel.
