Welcome message
The Welcome message function allows the TV
to show a customized greeting to the hotel
guest whenever the TV is switched on. This
helps to personalize the hotel experience for
guests. The Welcome message can consist
of 2 lines of text, with each line containing a
maximum of 20 alphanumeric characters. Use
▲▼◄►on the remote control to compose
the Welcome message.
Note
•
To activate the Welcome message, the
[Display message]
option must be
[On].
Welcome message is always disabled if you
•
select
[Control settings]
>
[OSD display]
>
[Off.]
[Line 1]
•
: Sets the characters of the
first line message.
[Line 2]
•
: Sets the characters of the
second line message.
[Clear]:
•
Clear the settings in Line 1
and Line 2.
[Message Time-out]
•
: Sets the period
of time to display the welcome
message on the screen when TV is
turned on from standby / Off.
Control settings
[Local KB lock]
[Off]:
•
The TV local buttons
/-, P/CH +/-
and
SOURCE
will function normally.
[On]:
•
The TV local buttons
VOLUME
+/-, P/CH +/-
and
SOURCE
are
locked.
[All]:
•
All TV local buttons are locked,
including
B
POWER
button.
[RC lock]
Disables the operation of the Guest remote
control.
[Off]:
•
All buttons on Guest remote
control will function normally.
[On]:
•
All buttons on the Guest remote
control are disabled. (It is still possible
to enter the Professional setup menu by
pressing
[3,
1, 9, 7, 5, 3+
¬
(MUTE)]
)
.
[OSD display]
Sets this function to show or hide screen
information.
[Off]:
•
Screen information is suppressed.
[On]:
•
Normal screen information is
displayed.
[High security mode]
[Off]:
•
Professional mode setup menu
can be accessed by both Guest remote
control (Press
[3, 1, 9, 7, 5, 3 +
¬
(MUTE)]
)and the Professional setup
remote control (Press
M
button
)
[On]:
•
Professional mode setup menu
can only be accessed by the Professional
setup remote control.
[Auto scart]
Enables auto scart switching or break-in
Professional mode.
[Off]:
•
Disables auto scart switching or
break-in Professional mode.
[On]:
•
Enables auto scart switching or
break-in Professional mode.
[EXT 1]:
•
(SCART 1)(Only available if
EXT I source is connected to the TV).
Selects EXT I as the auto switching
source when TV restarts from standby /
Off, or when EXT 1 signal is detected.
[EXT 2]:
•
(SCART 2)(Only available if
EXT 2 source is connected to the TV).
Selects EXT 2 as the auto switching
source when TV restarts from standby /
Off, or when EXT 2 signal is detected.
[Power scart]:
•
Sets scart source as
power on / off button. When the
connected scart source is turned on /
off, the TV enters to on / standby mode
simultaneously.
