28
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
The EasyLink-compliant device must be
•
switched on and selected as the source.
Philips does not guarantee 100%
•
interoperability with all HDMI CEC devices.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not
•
intend to use it.
1
Press
MENU
.
2
Press
to select
[Setup]
>
[Installation]
>
[Preferences]
>
[EasyLink]
.
3
Select
[On]
or
[Off]
.
Use one-touch play
1
After enabling EasyLink, press play on
your device.
The TV automatically switches to the
»
correct source.
Use one-touch standby
1
Press (
Standby-On
) on the TV’s or
device’s remote control.
The TV and all connected HDMI
»
devices switch to standby.
EN
