background image

xii

implied or statutory, to which, under any applicable law, it might be 

deemed to have been subject.

7.     Claims of Infringement. If Recipient learns of any third party claim 

that any disposition of Covered Code and/or functionality wholly 

or partially infringes the third party’s intellectual property rights, 

Recipient will promptly notify SGI of such claim.

8.     Versions  of  the  License.  SGI  may  publish  revised  and/or  new 

versions of the License from time to time, each with a distinguishing 

version number. Once Covered Code has been published under 

a particular version of the License, Recipient may, for the duration 

of the license, continue to use it under the terms of that version, 

or choose to use such Covered Code under the terms of any 

subsequent version published by SGI. Subject to the provisions of 

Sections 3 and 4 of this License, only SGI may modify the terms 

applicable to Covered Code created under this License.

9.     DISCLAIMER  OF  WARRANTY.  COVERED  CODE  IS 

PROVIDED “AS IS.” ALL EXPRESS AND IMPLIED WARRANTIES 

AND  CONDITIONS  ARE  DISCLAIMED,  INCLUDING, 

WITHOUT  LIMITATION, ANY  IMPLIED WARRANTIES AND 

CONDITIONS  OF  MERCHANTABILITY,  SATISFACTORY 

QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-

INFRINGEMENT. SGI ASSUMES NO RISK AS TO THE QUALITY 

AND  PERFORMANCE  OF  THE  SOFTWARE.  SHOULD 

THE  SOFTWARE  PROVE  DEFECTIVE  IN ANY  RESPECT,  SGI 

ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR 

OR  CORRECTION.  THIS  DISCLAIMER  OF  WARRANTY  IS 

AN  ESSENTIAL  PART  OF THIS  LICENSE.  NO  USE  OF ANY 

COVERED  CODE  IS  AUTHORIZED  HEREUNDER  EXCEPT 

SUBJECT TO THIS DISCLAIMER.

10.     LIMITATION  OF  LIABILITY.  UNDER  NO  CIRCUMSTANCES 

NOR  LEGAL  THEORY,  WHETHER  TORT  (INCLUDING, 

WITHOUT  LIMITATION,  NEGLIGENCE  OR  STRICT 

LIABILITY),  CONTRACT,  OR  OTHERWISE,  SHALL  SGI  OR 

ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT, 

SPECIAL,  INCIDENTAL,  OR  CONSEQUENTIAL  DAMAGES 

OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, 

DAMAGES  FOR  LOSS  OF  GOODWILL, WORK  STOPPAGE, 

LOSS  OF  DATA,  COMPUTER  FAILURE  OR  MALFUNCTION, 

OR  ANY  AND  ALL  OTHER  COMMERCIAL  DAMAGES 

OR  LOSSES,  EVEN  IF  SUCH  PARTY  SHALL  HAVE  BEEN 

INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS 

LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY 

FOR DEATH OR PERSONAL INJURY RESULTING FROM SGI’s 

NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS 

SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW 

THE  EXCLUSION  OR  LIMITATION  OF  INCIDENTAL  OR 

CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND 

LIMITATION MAY NOT APPLY TO RECIPIENT.

11.     Indemnity. Recipient shall be solely responsible for damages arising, 

directly or indirectly, out of its utilization of rights under this License. 

Recipient will defend, indemnify and hold harmless Silicon Graphics, Inc. 

from and against any loss, liability, damages, costs or expenses (including 

the payment of reasonable attorneys fees) arising out of Recipient’s use, 

modification, reproduction and distribution of the Covered Code or out 

of any representation or warranty made by Recipient.

12.     U.S. Government End Users. The Covered Code is a “commercial 

item”  consisting  of  “commercial  computer  software”  as  such 

terms are defined in title 48 of the Code of Federal Regulations 

and all U.S. Government End Users acquire only the rights set 

forth in this License and are subject to the terms of this License.

13.     Miscellaneous. This License represents the complete agreement 

concerning the its subject matter. If any provision of this License 

is held to be unenforceable, such provision shall be reformed so 

as to achieve as nearly as possible the same legal and economic 

effect as the original provision and the remainder of this License 

will  remain  in  effect.  This  License  shall  be  governed  by  and 

construed in accordance with the laws of the United States and 

the State of California as applied to agreements entered into and 

to  be  performed  entirely  within  California  between  California 

residents. Any litigation relating to this License shall be subject to 

the exclusive jurisdiction of the Federal Courts of the Northern 

District of California (or, absent subject matter jurisdiction in such 

courts,  the  courts  of  the  State  of  California),  with  venue  lying 

exclusively in Santa Clara County, California, with the losing party 

responsible for costs, including without limitation, court costs and 

reasonable  attorneys  fees  and expenses. The  application of  the 

United  Nations  Convention  on  Contracts  for  the  International 

Sale of Goods is expressly excluded. Any law or regulation that 

provides that the language of a contract shall be construed against 

the drafter shall not apply to this License.

Exhibit A

License Applicability. Except to the extent portions of this file are made 

subject to an alternative license as permitted in the SGI Free Software 

License B, Version 1.1 (the “License”), the contents of this file are subject 

only to the provisions of the License. You may not use this file except in 

compliance with the License. You may obtain a copy of the License at 

Silicon  Graphics,  Inc.,  attn:  Legal  Services,  1600 Amphitheatre  Parkway, 

Mountain View, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB
Note  that,  as  provided  in  the  License,  the  Software  is  distributed  on 

an  “AS  IS”  basis,  with  ALL  EXPRESS  AND  IMPLIED  WARRANTIES 

AND  CONDITIONS  DISCLAIMED,  INCLUDING,  WITHOUT 

LIMITATION,  ANY  IMPLIED  WARRANTIES  AND  CONDITIONS 

OF  MERCHANTABILITY,  SATISFACTORY  QUALITY,  FITNESS  FOR A 

PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
Original Code. The Original Code is: [name of software, version number, 

and release date], developed by Silicon Graphics, Inc. The Original Code is 

Copyright (c) [dates of first publication, as appearing in the Notice in the 

Original Code] Silicon Graphics, Inc. Copyright in any portions created by 

third parties is as indicated elsewhere herein. All Rights Reserved.
Additional Notice Provisions: [such additional provisions, if any, as appear 

in the Notice in the Original Code under the heading “Additional Notice 

Provisions”]

Summary of Contents for 22PFL4907




































































Reviews: