12
English
Connecting the antenna or unencrypted
cable
Be sure your antenna or other device is connected properly before
plugging in the AC power cord.
If you connect to an antenna through RF cable
Any DTV programs that are broadcasted in your area can be received
for free through an antenna connection.
IN
RF cable
OUT
cable
If you connect a set-top box through HDMI
If the TV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct Source by using
SOURCE
.
set-top box
HDMI cable
RF cable
IN
OUT
IN
Connecting a set-top box, Blu-ray / DVD recorder via
composite connectors and Analog Audio
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
OUT
IN
IN
IN
IN
OUT
OUT
OUT
IN
OUT
OUT
IN
IN
RF cable
RF cable
cable
set-top box
Blu-ray/DVD recorder
Audio L/R + video cable
Audio L/R +
video cable
Note
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• If there is no input signal and no operation for 15 minutes, the unit will go into standby
mode automatically.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet
after all the necessary connections are made.
Caution
• Do not connect the AC power cord to a power supply outside the indicated voltage of
this unit (AC 120V).
• Connecting the AC power cord to a power supply outside of this range may result in
fire or electrical shocks.
Note
• Each time you plug in the AC power cord, no operations will be performed for a few
seconds. This is not a malfunction.
RF cable
