15
English
4 Use your TV
Switching on your TV and putting it in
Standby mode
To Turn Power On or to Turn Standby On
• Press on the panel or the remote control.
Note
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low Standby power
consumption.
Adjusting volume
VOL
To increase or decrease volume
• Press
VOL
+ / VOL −
on the remote control.
To mute or unmute sound
• Press
(MUTE)
on the remote control to mute the sound.
• Press
(MUTE)
again or
VOL
+ / VOL −
to recover the original
sound.
Switching channels
PREV.CH
.
CH
To select Channels by using CH + / CH −
• Press
CH +
(up) /
CH −
(down) on the remote control.
To select Channels by using the NUMBER buttons
Digital TV operation
• For Digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
– When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
.
Analog/Cable TV operation
– When selecting cable or Analog channel 11
Press
PREV.CH
to return to the previously viewed channel.
Note
• To select the non-memorized channels, use the
NUMBER buttons
.
•
Channel not available
or
No Signal
will appear on the TV screen after the subchannel
broadcast is over.
•
Audio only
message will appear on the TV screen, when you receive only sound signal.