4.6 Features Menu
1
Press
2
Select
[Setup]
> Select
[Features]
then press
OK
3
Select one of the following settings then
Press to move, and press to adjust.
•
[Factory Settings]
:This function is used for
•
[OSD Duration] :
This function is used to OSD
timeout in step of 15,30,45,60 secs.
[Features in VGA Mode] :
•
[Auto Adjust]:
This automatically adjust
H & V-position, Phase and Clock for VGA
mode.
•
[V-Position]:
Adjust the vertical
position of image [Only in VGA].
•
[H-Position]:
Adjust the horizontal
position of image [Only in VGA]
.
•
[Clock]:
Adjust the picture if not in sync
•
with TV screen.
•
[Phase]:
Adjust the picture if there is any
•
blurring or shimmer in text.
[Only in VGA].
•
Picture
Sound
Features
Installation
OSD Duration
Blueback
Sleep Time
Factory Settings
•
[Blueback] :
This function is used to ON/OFF
the blue screen at no signal condition.
•
[Sleep Time] :
This function is used to ON/OFF
step of 10,20,30,60,90,120,180,240 mins.
Reset to factory default settings.
is not reproduced properly.
Note: For India color system is Auto or
PAL.
•
[Sound System]
: Change the sound
•
[Manual
]
Search
:Select this for manually
channels.
•
[Auto Search]
:Select the function TV
set will start auto tuning for all available
4.7 Installation Menu
1
Press .
2
Select
[Setup]
> Select
[Installation]
then press
OK
3
Select one of the following settings, then
•
[Color System] :
Change the color system
(AUTO/PAL/NTSC) setting if the picture
sound system (BG/M/DK/I) setting if sound
is not reproduced properly.
Note: For India sound system is BG.
searching the channels,select the function
from which tuning will start.
[Fine Tune]:
You can Fine tune the program,
In case poor reception.
•
Press to move, and press to adjust.
[Skip]:
This function is used to Skip any
•
program.
[Channel Edit]:
You can Delete, Rename,
Move or Skip any programmes.
•
Blueback
EN 11
