34
EN
[On]:
Show ThemeTV on the display after
pressing the ThemeTV button on the RC.
[Off]
ThemeTV disabled.
[Startup] Show ThemeTV on startup and able to
showd ThemeTV by pressing the TTV
button on the RC.
[VSecure]
VSecure is the hospitality content scrambling method
used by the Philips Hospitality TVs. With its internal
VSecure Authorization key a VSecure Unprotect key
can be generated. If this VSecure Unprotect key is
stored in the TV, the TV is able to descramble
protected content. Loading the VSecure Unprotect
key can be done by USB memory device or via DVB
RF:
[Mode]
[Stand alone]:
The VSecure Unprotect key is to be
stored once via USB and will remain
available until manual erasing it.
[RF Static]:
The VSecure Unprotect key is to be
stored via RF and will remain valid until
manual erasing it or receiving a
successive VSecure Unprotect key.
[RF Dynamic]:
The VSecure Unprotect key is to be
stored via RF and will remain valid until
power down or receiving a successive
VSecure Unprotect key.
[Load key to USB]
[Action]
Place a USB memory device in the
USB side I/O.
Press ‘
>
’ or ‘
OK
’ to copy the VSecure
Authorization key to the USB memory
device
[Load key to TV]
[Action]
Place a USB memory device with a
valid VSecure Unprotect key in the
USB side I/O.
Press ‘
>
’ or ‘
OK
’ to copy the VSecure
Unprotect key to the USB memory
device
[Vsecure self test]
[Action]
Internal self test to validate VSecure.
After this load proper hotel specific
keys.
[Program Info]
This function is to set the necessary DVB
parameters to locate the proper VSecure RF
channel to load the VSecure RF Static or RF
Dynamic key(s):
[Frequency]
Frequency of MUX
(0362)
[Medium]
Cable
or Antenna (DVB T/C)
[Service ID]
# # # # #
(00001)
[ONID]
# # # # #
(00000)
[NID]
# # # # #
(00000)
[TSID]
# # # # #
(00000)
[Symbol Rate] # . # # #
(6.900)
[Modulation]
QAM16
, QAM32, QAM64,
QAM128, QAM256
Above parameters must match head-end configuration
[Erase key option]
This function is to set the stored VSecure Unprotect
key(s) to erase:
[Shared key]
Erase the Shared key
[Odd key]
Erase the Odd key
[Even key]
Erase the Even key
[All keys]
Erase the Shared, Odd and
Even keys
[Erase key option]
This function is erase the key that were selected by
the Erase key option:
[Action]
Press ‘
>
’ or ‘
OK
’ to erase the
key(s).
settings]
the simultaneously working of the
speakers and the headphone/bathroom
ker:
[TV Speaker Enable]
[Off]:
The main speakers are muted.
The RC can control the volume and mute
of the headphone/bathroom speaker
[On]:
The main speakers are active and the
behavior of the headphone/bathroom
speaker is defined by the Independent
Main Speaker Mute.
[Independent Main Speaker Mute]
[Off]:
The RC volume and mute will control the
main speakers and headphone/bathroom
speaker simultaneously.
[On]:
If the main speakers are muted by the
RC, the RC will control the volume of the
headphone/bathroom speaker
[Default Main Speaker Volume]
This option defines the volume level that will be set
to the main speakers when the TV is unmated and
the Independent Main Speaker Mute is set to ‘On’.
