Alignments
6.
Source selection
EXT1/AV1 type
SCART CVBS RGB LR
Select input source when connected with external
equipment
CVBS Y/C YPbPr LR
CVBS Y/C YPbPr HV LR
EXT2/AV2 type
SCART CVBS RGB LR
Select input source when connected with external
equipment
CVBS LR
YPbPr LR
None
EXT3/AV3 type
None
Select input source when connected with external
equipment
CVBS
CVBS LR
CVBS Y/C LR
YPbPr
YPbPr LR
YPbPr HV LR
SIDE I/O
Off/On
Select SIDE I/O On/Off
S-VIDEO (Y/C)
Off/On
Select S-VIDEO (Y/C) On/Off
HDMI 2
Off/On
Select HDMI 2 On/Off
HDMI 3
Off/On
Select HDMI 3 On/Off
HDMI side
Off/On
Select HDMI side On/Off
HDMI CEC Viewport 21:9
Off/On
Select HDMI CEC Viewport 21:9 On/Off
HDMI CEC OneUX seamless
Off/On
Select HDMI CEC OneUX seamless On/Off
Miscellaneous
Region
Europe
Select Region/country
AP-PAL-Multi
China
Australia
Latam
Russia
Tuner type
Select type of Tuner used
Hotel mode
Off
Hotel mode is Off
Option numbers
Group 1
e.g. “00008.01793.15421.08192”
The first line (group 1) indicates hardware options 1
to 4
Group 2
e.g. “44013.34315.00000.00000”
The second line (group 2) indicates software options
5 to 8
Store
Store after changing
Initialise NVM
N.A.
Store
Select Store in the SAM root menu after making
any
changes
Operation hours display
0003
In case the display must be swapped for repair, you
can reset the “”Display operation hours” to “0”. So,
this one does keeps up the lifetime of the display
itself (mainly to compensate the degeneration
behaviour)
Software maintenance
Software events
Display
Display information is for development purposes
Clear
Test reboot
Test cold reboot
Test application crash
Hardware events
Display
Display information is for development purposes
Clear
Test setting
Digital info
Centre frequency: 774605208
QAM modulation: None
Display information is for development purposes
Symbol rate:
Original network ID: 0
Network ID: 0
Transport stream ID: 0
Service ID: 0
Hierarchical modulation: 0
Selected video PID: 0
Selected main audio PID: 0
Selected 2nd audio PID: 0
Install start frequency
000
Install start frequency from “0” MHz
Install end frequency
999
Install end frequency as “999” MHz
Default install frequency
Installation
Digital only
Select Digital only or D Analogue before
installation
D Analogue
Main Menu
Sub-menu 1
Sub-menu 2
Sub-menu 3
Description