32
AS A UNIVERSAL REMOTE CONTROL - SEARCH METHOD FOR ACCESSORIES
This remote control may not be
AS A UNIVERSAL REMOTE CONTROL - CODE ENTRY FOR ACCESSORIES
VCR
Cable Box
DBS or other Accessory
1
Press MODE on the remote control.
2
Press the
VCR RECORD
button on the device
and release.
3
Press
AUTO SOUND
on the remote within 30
seconds, then release.
4
Enter the FOUR-DIGIT REMOTE CODE
NUMBER for your device. The remote is now
ready to send command to the unit
5
Point the remote at the Device. Press POWER on
the remote control to turn the unit On.
If this doesn't work the first time, repeat the steps
using another remote code number.
1
Turn On the device you are attempting to program.
2
Place a VCR Tape or DVD disc into the device.
Press the
Play
button on the device.
3
Press
MODE
on the remote control. Choose
VCR
for programming Video Casette Recorders
or
ACC
for all other accessories.
4
Press the
VCR RECORD
button on the
device and the
AUTO SOUND
button on the
remote control simultaneously and hold them
down. As you continue to hold down the buttons,
the remote will run through its programmed code
list with a command for the
VCR
or
DVD
to
STOP
or
PLAY
. For Cable Boxes and Satellite
Receivers the command will be to
CHANGE
CHANNELS
.
5
When the
STOP
command appears release
the two buttons. For Cable Boxes and Satellite
Receivers, as soon as the Channels changes ONCE,
IMMEDIATELY release the buttons.
DVD
VCR
Cable Box
Satellite
System
AUTO
SOUND
POWER
MODE
AUTO
SOUND
MODE
I
f your remote control will not operate your accessory devices, look up the
your remote control will not operate your accessory devices, look
your remote control will not operate your accessory devices, look
four-digit code listed by your brand on
pages 33 - 35. Read through steps 1 - 5 before beginning.
T
he search method of programming your remote can ta
T
T
ke as long as 12 mintues to perform so we recommend you
use it as a last reso
T
T
rt. Read all the steps before beginning.
