The television set has 4 keys which are
located on the front or the top of the set
depending on the model.
The VOLUME - + (-
”
+) keys are used to
adjust sound levels.
The PROGRAM - + (- P +) keys are used to
select the required programmes.
To access the menus, simultaneously hold
down the
”
- and
”
+ keys.The
PROGRAM - + keys may then be used to
select an adjustment and the -
”
+ keys to
make that adjustment.
To exit from the menus, hold down the 2
”
- and
”
+ keys.
Note: when the CHILD LOCK function is activated,
these keys are unavailable (refer to FEATURES
menu on page 8).
2
&
Positioning the television set
Place your TV on a solid, stable surface, leaving
a space of at least 5 cm around the appliance.
To avoid accidents, do not put anything on the
set such as a cloth or cover, a container full of
liquid (vase) or a heat source (lamp).The set
must not be exposed to water.
é
Connections
• Insert the aerial plug into the
:
socket at
the rear of the set.
• Insert the mains plug into a wall socket (220-
240 V / 50 Hz).
é
Optional Surround loudspeakers
To connect the optional surround loudspeakers
see the detailed informations, on page 16.
“
Remote control
Insert the two R6-type batteries (supplied)
making sure that they are the right way round.
Check that the mode selector is set to TV.
The batteries supplied with this appliance do not
contain mercury or nickel cadmium. If you have
access to a recycling facility, please do not discard
your used batteries (if in doubt, consult your dealer).
When the batteries are replaced, use the same type.
‘
Switching on
To switch on the set, press the on/off key.
A red indicator comes on and the screen
lights up. Go straight to the chapter Quick
installation on page 4.
If the television remains in standby mode,
press P
#
on the remote control.
The indicator will flashe when you use the remote
control.
5 cm
5 cm
5 cm
Installing your television set
The keys on the TV set
