background image

3139 116 19511 ( ENG)

16

With the SOUND

 

3

 or 

4

 controls,

you can change the level of any DSC
setting except CLASSIC.

• First select the DSC feature, then

press the 

SOUND

 

3

 or 

4

 until the

desired digital sound setting level is
reached.

The digital sound setting level will
increase or decrease between
level 1 and 5.

Note:
– For neutral setting, select CLASSIC and

switch off DBB.

DYNAMIC BASS BOOST (DBB)

There are three DBB settings to
enhance the bass response.

• Press 

DBB

 briefly to select a bass

boost level.

The respective DBB level is being
encircled and lit.

BEAT

”, “

PUNCH

” or “

BLAST

will be displayed.

To switch off DBB

• Press 

DBB

 

briefly until “

DBB OFF

is displayed.

Note:
– Some CDs or tapes might be recorded

in high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.

OPERATING THE  SYSTEM

Automatic DSC-DBB selection

The best DBB setting is generated
automatically for each DSC selection. You
can manually select the DBB setting that
best suits your listening environment.

MUTE 

(on remote control only)

This feature allows you to temporarily
switch off the sound without switching
off the system when you require a
moment of silence.

• Press 

MUTE

 on the remote control

to switch off the sound.

MUTE

” will be displayed.

• Press 

MUTE

 again on the remote

control or increase the 

VOLUME

level to switch on the sound.

Summary of Contents for 3 CD CHANGER PRO LOGIC FWP73P37
































Reviews: