Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C User Manual Download

Page: 9 / 31

English

3139 116 19721

When you have completed the Dolby Pro
Logic setup, you are ready to enjoy Home
Cinema sound.

• Press

DPL

(PRO

LOGIC)

repeatedly to

select and cycle
through the various
sound modes.

Dolby Surround

™

Dolby Center

Phantom

™

Dolby 3 Stereo

™

Stereo

™

Dolby Surround …

™

The Dolby Pro Logic display panel
will light up with the selection.

Dolby Surround

This setting is for a full Dolby Surround Pro
Logic mode.

• Press

DPL

to select the Dolby Surround

mode.

™

The message
"

DOLBY

SURROUND

will be
displayed.

™

The DPL display panel will light up.

Dolby Center Phantom

This setting is for use without the center
speaker. It redistributes the center speaker
sound to the left and right speakers,
providing conventional stereo across the
front.

• Press

DPL

to select the Dolby Pro Logic

Center Phantom mode.

™

The message
"

DOLBY

CENTER

PHANTOM

will be
displayed.

™

The DPL display panel will light up.

Dolby 3 Stereo

Use this setting when full surround is not
required, but a wide stereo sound is
desired. It only requires the left, right and
center speakers.

• Press

DPL

to select the Dolby 3 Stereo

mode.

™

The message
"

DOLBY 3

STEREO

" will

be displayed.

™

The DPL display
panel will light up.

Normal Stereo

This setting is for normal stereo sound
without Dolby Pro Logic. It only requires the
left and right speakers.

• Press

DPL

to select the Stereo mode.

™

The message
"

STEREO

" will

be displayed.

™

The DPL display
panel will light
up.

DOLBY PRO LOGIC

PRO LOGIC

DPL

TEST T

LEFT

CENTER

RIGHT

SURR

LEFT

CENTER

RIGHT

SURR

LEFT

CENTER

RIGHT

SURR

LEFT

CENTER

RIGHT

SURR

Important!
1 For the best Dolby Pro Logic sound,

switch on DPL with DSC set to
“Classic” and with VEC off.

2 Dolby Pro Logic mode will

automatically switch to normal
Stereo mode when headphones are
connected.

3 Switch to normal stereo mode when

you record on a tape.

pg 01-31/P88/22-Eng

3/6/00, 1:26 PM

Summary of Contents for 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C
































Search results

Summary of Contents for 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C

Reviews:

Related manuals for 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C

Brands by name

Popular brands

Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C, User Manual

Search results

Summary of Contents for 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C

Reviews:

Related manuals for 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C

Brands by name

Popular brands