5
Turn on
5.1
On or Standby
Make sure you have plugged in the main power on the back of
the TV before you turn on the TV.
If the red indicator light is off, press the Joystick on the right side
on the back of the TV to put the TV in standby - the red
indicator will light up.
With the TV in standby, press
on the remote control to turn
the TV on.
Switch to standby
To switch the TV to standby, press
on the remote control.
Turn Off
To turn the TV Off, press the Joystick on the right of the TV on
the back. The red indicator light is off. The TV is still connected
to the main power but consumes a minimum of energy.
To turn off the TV completely, disconnect the power plug.
When disconnecting the power plug, always pull the power plug,
never the cord. Ensure that you have full access to the power
plug, power cord and outlet socket at all times.
5.2
Keys on TV
While the on-screen display is on, press the Joystick to display
the menu.
• Use the arrow/navigation keys to navigate up, down, left or
right.
• Press the Joystick to confirm a selection or setting.
5.3
Word mark brightness
You can turn off or adjust the word mark lighting.
To adjust or turn off…
1 -
Press
and select
Setup
and press
OK
.
2 -
Select
TV settings
>
General settings
>
Word mark
brightness
and press
OK
.
3 -
Select
Maximum
,
Medium
,
Minimum
or select
Off
to turn off
the lighting of the word mark.
4 -
Press
, repeatedly if necessary, to close the menu.
19