Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
• Both TVs have compatible software versions.
Current version
You can check the current version of the TV software.
1 -
Press
, select
Setup
and press
OK
.
2 -
Select
Software settings
>
Current software info
and press
OK
.
Copy channel list
To copy a channel list . . .
1 -
Turn on the TV that has its channels installed. Plug in a USB
memory device.
2 -
Press
and select
Setup
and press
OK
.
3 -
Select
TV settings
>
General settings
>
Channel list copy
>
Copy to USB
and press
OK
. To copy the channel list from this
TV, you might be asked to enter the Child lock code you
entered during the installation.
4 -
When copying is done, unplug the USB memory device.
Now you can upload the copied channel list onto another
Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or not, you
must use a different way to upload a channel list.
To a TV that is not yet installed
1 -
Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 -
Plug in the USB memory device that holds the channel list of
the other TV.
3 -
To start the channel list upload, press
and
select
Setup
and press
OK
.
4 -
Select
TV settings
>
General settings
>
Channel list copy
>
Copy to TV
and press
OK
. You might be asked to enter the
Child lock code of this TV.
5 -
The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
To an already installed TV
1 -
Verify the country setting of the TV. (To verify this setting,
press
and select
Setup
and press
OK
. Select
Search for
channels
>
Reinstall channels
and press
OK
. Press
and later
Cancel
to leave the Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a reinstallation. To
start the reinstallation, press
and select
Setup
and press
OK
.
Select
TV settings
>
General settings
>
Reinstall TV
>
OK
.
Select the correct country and skip the Search for channels.
Finish the installation. When done, continue with step 2.
2 -
Plug in the USB memory device that holds the channel list of
the other TV.
3 -
To start the channel list upload, press
and
select
Setup
and press
OK
.
4 -
Select
TV settings
>
General settings
>
Channel list copy
>
Copy to TV
and press
OK
. You might be asked to enter the
Child lock code of this TV.
5 -
The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
Install digital channels
If you know the channel frequency of the channels you want to
install, you can search and store digital channels one by one. For
best results, contact the service provider.
1 -
Press
.
2 -
Select
Setup
>
Channel settings
>
Channel installation
.
3 -
Select
Digital: Reception test
>
Search
and press
OK
.
4 -
Press the numbered buttons to enter the channel frequency.
5 -
Select
Search
and press
OK
.
6 -
When the channel is found, select
Store
and press
OK
.
26