background image

14

Specifications

14.1

Environmental

Saving energy

The 

Eco settings

 bundle the settings that help the

environment.
While you are watching TV channels, press 

 to

open 

Eco settings

.

Press 

 again to close

 Eco settings

.

Energy saving

This Picture style sets the picture, in the most ideal
energy conscious setting.

Screen off

 

 

If you only listen to music, you can switch off the TV
screen to save energy.
Select

 Screen off

 and press 

OK

. To switch the

screen back on, press any key on the remote control.

Auto switch off

 

 

If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no signal for 10
minutes, the TV switches off automatically to save
energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, deactivate the
automatic switch off.

In addition to the Eco settings, your TV also has
environmentally friendly technology with regard to
power consumption.

Inactive devices off

 

 

Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that are
inactive.

Power management

 

 

The advanced power management of this TV ensures
the most efficient use of energy. You can check how
your personal TV settings, the level of brightness in
current onscreen pictures, and the surrounding light
conditions determine the relative power
consumption.
To check the relative power consumption . . .

1. Press 

 and select 

Setup

 and press 

OK

.

2. Select

 Watch demos

 >

 Active control Demo  and

press  OK

.

3. Select a setting to check the corresponding values.

European energy label

The 

European Energy Label

 informs you on the

energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country at 

www.philips.com/TV

Product Fiche

For 4101, 4111 series

32PHx4101

 

 

- Energy Efficiency Class : A+
- Visible Screen Size : 80 cm / 32 inch
- On Mode Power Consumption (W) : 30 W
- Annual Energy Consumption (kWh) * : 44 kWh 
- Standby Power Consumption (W) **: 0.30 W
- Off Mode Power Consumption (W) : 0.30 W
- Display Resolution (Pixels) : 1366x768p

32PFx4101

 

 

- Energy Efficiency Class : A+
- Visible Screen Size : 80 cm / 32 inch
- On Mode Power Consumption (W) :  32 W
- Annual Energy Consumption (kWh) * : 47 kWh 
- Standby Power Consumption (W) **: 0.30 W
- Off Mode Power Consumption (W) : 0.30 W
- Display Resolution (Pixels) : 1920x1080p

40PFx4101

 

 

- Energy Efficiency Class : A+
- Visible Screen Size : 102 cm / 40 inch
- On Mode Power Consumption (W) : 42 W
- Annual Energy Consumption (kWh) * : 61 kWh 
- Standby Power Consumption (W) **: 0.30 W
- Off Mode Power Consumption (W) : 0.30 W
- Display Resolution (Pixels) : 1920x1080p

40PFT4111

 

 

- Energy Efficiency Class : A+
- Visible Screen Size : 100 cm / 40 inch
- On Mode Power Consumption (W) : 42 W
- Annual Energy Consumption (kWh) * : 61 kWh 
- Standby Power Consumption (W) **: 0.30 W
- Off Mode Power Consumption (W) : 0.30 W
- Display Resolution (Pixels) : 1920x1080p

48PFx4101

 

 

- Energy Efficiency Class : A+
- Visible Screen Size : 121 cm / 48 inch
- On Mode Power Consumption (W) : 56 W

41

Summary of Contents for 32PFH4101

























































Reviews: