Switch Miracast On or Off
Switch on Miracast
Make sure Wi-Fi Miracast is switched on.
1
- Press
and select
Setup
and press
OK
.
2
- Select
Network settings
>
Wi-Fi
Miracast
>
On
and press
OK
.
3
- Press
, repeatedly if necessary, to close the
menu.
Switch off Miracast
If you do not want the TV to receive requests for
screen sharing from other devices, you can switch off
Miracast on the TV.
1
- Press
and select
Setup
and press
OK
.
2
- Select
Network settings
>
Wi-Fi
Miracast
>
Off
and press
OK
.
3
- Press
, repeatedly if necessary, to close the
menu.
Share a screen on TV
To share the screen of your smartphone, tablet or
computer on the TV . . .
1 -
Switch on the TV.
2 -
On the device, open an application such as Wi-Fi
Miracast, Wi-Fi Direct™, Intel®Wireless Display* or
similar and start scanning for other Miracast devices.
3 -
In the list of found devices, select the TV and
connect.
4 -
On the TV, agree to the request to connect to the
TV. You might be asked to enter a PIN code from the
device on the TV - enter the numbers with the digit
keys on the remote control. Alternatively, you might
be asked by the TV to enter a PIN code on the device.
If you connect, the TV will show the screen of the
device.
5 -
On the device, select the videos, photos or files
you want to watch on TV.
* Miracast is supported by WiFi 3.5 onwards.
Stop sharing
You can stop sharing a screen from the TV or from the
mobile device.
From the device
With the application you use to start Miracast, you
can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected programme.
From the TV
To stop watching the screen of the device on TV, you
can . . .
• press
to watch a TV broadcast
• press
to start another activity on TV
• press
SOURCES
to open the Sources menu and
select a connected device.
Block a device
The first time you receive a request to connect from a
device, you can block the device. This request, and all
requests in the future, from this device, will be
ignored.
To block a device, select
Block . . .
in the request
window and press
OK
.
Unblock all devices
All previously connected and blocked devices are
stored in the Wi-Fi Miracast list of connections. If you
clear this list, all blocked devices will be unblocked.
To unblock all blocked devices . . .
1 -
Press
and select
Setup
and press
OK
.
2 -
Select
Network settings
>
Reset Miracast group
.
3 -
Press
OK
to clear the list.
4 -
Press
, repeatedly if necessary, to close the
menu.
Blocking a previously connected device
If you want to block a device that you previously
connected, you need to clear the Wi-Fi Miracast
connections list first. If you clear this list, you will have
to confirm or block the connection for every device
again.
Screen delay
The normal delay when sharing a screen with
Miracast is about 1 second. The delay might be longer
if you are using older devices/computers with less
processing power.
Specifics
• Miracast on this TV is subject to the HDCP protocol
and cannot display copy-protected premium content
sent by a device.
• The maximum video resolution supported is 720p.
48
