background image

Know these 

safety 

symbols

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of 
uninsulated “dangerous voltage” within the apparatus’s enclosure 
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral triangle is intended to 
alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompanying 
the apparatus.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The caution marking is located on the rear or bottom of the cabinet.

CAUTION

Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.

Register Online at www.productrecords.com/phl

 to ensure:

Register Online at www.productrecords.com/phl today 

to get the very most from your purchase.

*Product Safety Notification  

*Additional Benefits 

By Registering your Product, you'll receive notification - 
directly from the manufacturer - in the rare case of a 
Product Recall or Safety Defect.

Registering your Product guarantees that you'll receive 
all of the Privileges to which you're Entitled, including 
special money-saving offers.

WARNING: 

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.  Apparatus shall 
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the 
apparatus.

CAUTION: 

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: 

Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la 
prise et pousser jusqu’au fond. 

Visit our World Wide Web Site at www.philips.com/support

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY 

CARES

• Manufacturers, retailers and the rest of the consumer 

electronics industry are committed to making home 
entertainment safe and enjoyable.

• As you enjoy your television, please note that all 

televisions – new and old- must be supported on proper 
stands or installed according to the manufacturer’s 
recommendations. Televisions that are inappropriately 
situated on dressers, bookcases, shelves, desks, speakers, 
chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

• 

ALWAYS

 follow the manufacturer’s recommendations 

for the safe installation of your television.

• 

ALWAYS

 read and follow all instructions for proper use 

of your television.

• 

NEVER

 allow children to climb on or play on the 

television or the furniture on which the television is 
placed.

• 

NEVER

 place the television on furniture that can easily 

be used as steps, such as a chest of drawers.

• 

ALWAYS

 install the television where it cannot be 

pushed, pulled over or knocked down.

• 

ALWAYS

 route cords and cables connected to the 

television so that they cannot be tripped over, pulled or 
grabbed.

WALL OR CEILING MOUNT YOUR 

TELEVISION

• 

ALWAYS

 contact your retailer about professional 

installation if you have any doubts about your ability to 
safely mount your television.

• 

ALWAYS

 use a mount that has been recommended by 

the television manufacturer and has a safety certification 
by an independent laboratory (such as UL, CSA, ETL).

• 

ALWAYS

 follow all instructions supplied by the 

television and mount manufacturers.

• 

ALWAYS

 make sure that the wall or ceiling where you 

are mounting the television is appropriate. Some mounts 
are not designed to be mounted to walls and ceilings 
with steel studs or cinder block construction. If you are 
unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is 

required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW 

PLACE IN YOUR HOME

• Many new television buyers move their older CRT 

televisions into a secondary room after the purchase of a 
flat-panel television. Special care should be made in the 
placement of older CRT televisions.

• 

ALWAYS

 place your older CRT television on furniture 

that is sturdy and appropriate for its size and weight.

• 

NEVER

 place your older CRT television on a dresser 

where children may be tempted to use the drawers to 
climb.

• 

ALWAYS

 make sure your older CRT television does 

not hang over the edge of your furniture.

CE.org/safety

3

.

English

Summary of Contents for 32PFL3509








































Reviews: