EN 56
Set secured connection with WPS PIN
1. To set secured connection, select the
[WPS pin]
and press
OK
.
2. Write down the 8-digit PIN code shown
on TV, then enter it in the router software
on your PC.
To find out where to enter the PIN code,
read the router manual.
Set secured connection with WPA
encryption
If you have WPA security on your router,
enter the pass phrase with the remote
control.
1. To enter the encryption key (the security
key) manually, select
[Standard]
, then press
OK
.
2. To access the onscreen keyboard, select
the text entry field, then press
OK
.
Set secured connection with WEP
encryption
If you have WEP security encryption, the TV
asks for the WEP encryption key in
hexadecimal numbers.
1. Locate the hexadecimal key in the router
software on your PC and make a note of the
first key in the WEP keys list.
2. Enter it on TV with the remote control.
If the security key is accepted, the TV is
connected with the wireless router.
3. If prompted, agree to the End User
License Agreement.
Wi-Fi integrated
This section is for Wi-Fi integrated TVs -
PFL45x8G
You can connect your TV to your home
network wirelessly.
Note
:
The wireless network operates in the same
2.4 GHz frequency spectrum as common
household devices, such as Dect phones,
microwave ovens or Bluetooth devices,
which can cause Wi-Fi interference. Move
these devices away from the TV.
•
For optimum Wi-Fi performance, place
the TV at a distance of less than 10 m
from the wireless router. Avoid
obstructions such as concrete walls
between the router and the TV.
•
Reception quality depends on the
location of the wireless router, and the
local Internet service provider.
•
To reduce network traffic, switch off
unused network equipment in the
home network.
•
While you play video over your
wireless home network, we
recommend that you use an IEEE
802.11 N router. The connection speed
may differ according to the operating
environment of your wireless home
network.
Start wireless setup
1. Switch on your wireless network router.
2. Press on the TV remote control.
3. Select
[Setup]
>
[Connect to network]
,
then press
OK
.
4. Follow the onscreen instructions.
WPS - Wi-Fi Protected Setup
1. If your router supports Wi-Fi Protected
Setup (WPS), press the WPS button on the
router.
2. After 2 minutes, select
[WPS]
on the TV,
then press
OK
.
The TV connects to your network. This
takes about 2 minutes.
