Service Modes, Error Codes, and Fault Finding
5.
5.4
Error Codes
The error code buffer contains all errors detected since the last
time the buffer was erased. The buffer is written from left to
right. When an error occurs that is not yet in the error code
buffer, it is displayed at the left side and all other errors shift one
position to the right.
Basically there are three kinds of error codes:
5.5
Fault Finding and Repair Tips
5.5.1
Speakers
Make sure that the volume is set to minimum during
disconnecting the speakers in the ON-state of the TV. The
audio amplifier can be damaged by disconnecting the speakers
during ON-state of the set!
5.5.2
Tuner
Attention: In case the tuner is replaced, always check the tuner
options.
Error Code
Event
000
No problem
011
I
2
C bus error
012
Tuner error
013
LCD panel