• Only for TVs with component connectors.
CVBS - Audio L R
CVBS - Composite Video is a high quality connection. The CVBS
connection can be used for High Definition (HD) TV signals.
Next to the CVBS signal adds the Audio Left and Right signals
for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
• Only for TVs with component/composite connectors.
Scart
SCART is a good quality connection. The SCART connection
can be used for CVBS and RGB video signals but cannot be used
for High Definition (HD) TV signals. The SCART connection
combines video and audio signals.
Use the SCART adapter cable to connect your device.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This
optical connection can carry 5.1 audio channels. If your device,
typically a Home Theatre System (HTS), has no HDMI ARC
connection, you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out - Optical
connection sends the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the audio
capabilities of your Home Theatre System.
For more information, press
Keywords
and look up
Audio
Out settings
.
If the sound does not match the video on screen, you can adjust
the audio to video synchronisation.
For more information, press
Keywords
and look up
Audio
to video sync
.
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the connected
devices. Devices must support HDMI CEC and must be
connected with an HDMI connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure that all
HDMI CEC settings are properly set up on the connected
EasyLink devices. EasyLink might not work with devices from
other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on different
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
13
