2.4
Power cable
• Insert the power cable into the
POWER
connector on the
back of the TV.
• Make sure the power cable is securely inserted in the
connector.
• Make sure that the power plug, in the wall socket, is accessible
at all times.
• When you unplug the power cable, always pull the plug, never
pull the cable.
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the TV
for a long period of time.
In
Help
, press
Keywords
and look up Switching on for more
information on switching the TV on or off.
2.5
Antenna cable
Insert the antenna plug firmly into the
ANTENNA
socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6
Satellite dish
Attach the satellite F-type connector to the satellite connection
SAT
at the back of the TV.
• Only for TVs with a built-in satellite tuner.
8