Preferred subtitle languages
A digital broadcast can offer several subtitle
languages for a programme. You can set a preferred
primary and secondary subtitle language. If subtitles
in one of these languages are available, the TV will
show the subtitles you selected.
To set the primary and secondary subtitle language…
1. Press
, select
General settings
and
press
(right) to enter the menu.
2. Select
Languages
and press
(right) to enter
the menu.
3. Select
Primary subtitle
language
or
Secondary
subtitle language
, and press
OK
.
4. Select the language you need and press
OK
.
5. Press
(left) repeatedly if necessary, to close the
menu.
Select a subtitle language
If none of the preferred subtitle languages are
available, you can select another subtitle language if
available. If no subtitle languages are available, you
cannot select this option.
To select a subtitle language when none of your
preferred languages are available…
1. Press
OPTIONS
.
2. Select
Subtitle language
and select one of the
languages as subtitles temporarily.
Subtitles for analogue channels
For analogue channels, you need to make the
subtitles available for each channel manually.
1. Switch to a channel and press
TEXT
to open Text.
2. Enter the page number for subtitles, usually
888
.
3. Press
TEXT
again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open
Status
in the
Options
menu.
Audio language
Preferred audio language
A digital broadcast can offer several audio languages
(spoken languages) for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to the audio language.
To set the primary and secondary audio language…
1. Press
, select
General settings
and
press
(right) to enter the menu.
2. Select
Languages
and press
(right) to enter
the menu.
3. Select
Primary
audio
language
or
Secondary audio language
,
and press
OK
.
4. Select the language you need and press
OK
.
5. Press
(left) repeatedly if necessary, to close the
menu.
Select an audio language
If none of the preferred audio languages are
available, you can select another audio language if
available. If no audio languages are available, you
cannot select this option.
To select an audio language when none of your
preferred languages are available…
1. Press
OPTIONS
.
2. Select
Audio language
and select one of the
languages as audio temporarily.
Dual I-II
If an audio signal contains two audio languages but
one language or both has no language indication, this
option is available.
Common Interface
If prepaid premium content is available from a CAM,
you can set the provider settings with this option.
Mono / Stereo
You can switch the sound of an analogue channel to
Mono or Stereo.
To switch to Mono or Stereo…
1. Tune to an analoge channel.
2. Press
OPTIONS
, select
Mono/Stereo
and
press
(right).
3. Select
Mono
or
Stereo
and press
OK
.
4. Press
(left) repeatedly if necessary, to close the
menu.
Clock
Display time on the corner of the TV screen.
20
