2.2
Installing NetCam4 Setup Program
1.
Insert the supplied CD into
your CD-ROM drive and
copy ‘NetCam4.exe’ to your
PC. Locate and double
click. Follow the screen
instructions.
2.3
Assigning IP Address and Starting Configuration
■
You can only setup a
NetCam4 that is connected
on a local network or direct
via the Red-cross cable.
■
When the setup program is
executed, the panel shows
every NetCam4 connected at
the local network.
■
Choose the NetCam4 that
you want to assign an IP
address or you want to
configure. When the
NetCam4 is selected, an IP
address is displayed.
■
Enter a password in the
‘Admin’s Password’ box.
(Default password is
‘admin’).
■
To change the IP address, click the ‘Change IP Addr’ button.
12
NetCam4
Section 2
NetCam_ii_99011_0047.qxd 12/13/00 1:54 PM Page 12
