17
EN
English
Using your TV as a PC monitor
Use an HDMI-DVI cable or an HDMI-DVI adaptor to connect a PC to
your TV. For sound, add an audio cable with a stereo mini jack.
Caution
•
Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supported screen resolutions
The following screen resolutions are supported in PC mode:
Resolution
Refresh rate
640 x 480
60Hz
800 x 600
60Hz
1024 x 768
60Hz
1280 x 768
60Hz
1360 x 768
60Hz
1920 x 1080
60Hz
Changing sound settings
1
Press
MENU
on the remote control and select
[Sound]
.
Picture
Sound
Setup
Features
Language
USB
Auto Sound
Standard
On
Off
Speakers EasyLink
Stereo
Equalizer
Virtual Surround Sound
Auto Volume Leveling
TV Speakers
Audio Setting
2
Press
Î
or
ï
to highlight a sound setting and press
OK
to select
the setting.
3
Adjust the following items.
[Auto Sound]
Press
Î
or
ï
to select the desired setting, then press
OK
.
(
[Personal]
,
[Standard]
,
[Movie]
,
[Music]
and
[News]
)
[Equalizer]
Adjust tone quality for each frequency.
Press
Í
or
Æ
to select the speci
fi
c frequency, then press
Î
or
ï
to
adjust the level.
[Virtual Surround Sound]
Sound mode for more spatial or surround sound reproduction.
Press
Î
or
ï
to select the desired option, then press
OK
.
On
The Virtual Surround Sound will be effective.
Off
The original sound will be output.
[Auto Volume Leveling]
Reduces sudden changes in volume, for example, during
commercials or when switching channels.
Press
Î
or
ï
to select the desired option, then press
OK
.
On
Select if you want to reduce volume differences
between the TV commercials and the programs.
Off
Select if you want to turn off the Auto Volume Leveling.
[TV Speakers]
This option will allow you to select the audio output from the
unit’s speakers. If you connect this TV to an external ampli
fi
er
which is compatible with HDMI CEC, you can use volume controls
on this TV to control volume on the external ampli
fi
er.
Press
Î
or
ï
to select the desired option, then press
OK
.
On
The sound will be output from the unit’s speakers.
Off
The sound will not be output from the unit’s speakers.
Speakers
EasyLink
You can control audio output from your connected
EasyLink Compliant Devices with
VOL + /
−
by using
this unit's remote control.
[Audio Setting]
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output mode
by pressing
SAP.
(see ‘Switching audio mode’ on page 14).
Press
Î
or
ï
to select the desired option, then press
OK
.
Stereo
Outputs stereo-audio
Mono
Outputs mono-audio
SAP
Outputs second audio program
4
Press
MENU
to exit.
Summary of sound settings
The following sound settings can be con
fi
gured. Depending on the
sound source, some sound settings are not available.
•
[Auto Sound]
: Sets all sound settings to the factory default.
•
[Equalizer]
: Adjusts individual sound frequencies.
•
[Virtual Surround Sound]
: Sound mode for more spatial or
surround sound reproduction.
•
[Auto Volume Leveling]
: Reduces sudden changes in volume, for
example, during commercials or when switching channels. Select
[On]
or
[Off]
.
•
[TV Speakers]
: Select
[On]
or
[Off]
, or output sound to an
EasyLink compliant device. When
[Speakers EasyLink]
is selected,
the TV speakers are disabled and TV sound outputs to the speakers
of the compatible EasyLink compliant device. Adjust the volume
using the unit’s remote control.
Note
•
If the TV is connected to a non-EasyLink compliant device and
[Speakers EasyLink]
is
selected, the TV speakers will not be disabled and continue to output sound.
Changing auto sound mode
1
Press
AUTO SOUND
to set your TV to a prede
fi
ned sound setting.
2
Press
Î
or
ï
to select one of the following settings:
•
[Personal]
: The customized settings you de
fi
ned by using the
[Sound]
menu.
•
[Standard]
: For normal TV viewing.
•
[Movie]
: Realistic sound settings for a cinematic experience.
•
[Music]
: Emphasize high and low freq. for instrument sound.
•
[News]
: Clear sound settings for human voice.
