ENGLISH
15
ENGLISH
14
◗
Regular cleaning guarantees better shaving
results.
◗
Do not immerse razor in water.
1
Always turn razor OFF, remove the
charging plug from outlet and remove cord
from razor before cleaning.
C
2
Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3
Clean inside razor heads and hair chamber
by running under hot water.
C
4
Clean outside of Razor Head Assembly by
running under hot water.
5
Close the Razor Head Assembly and shake
off excess water.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
C
6
Open Razor Head assembly again and
leave open to air dry.
4
Close trimmer by sliding trimmer switch
down.
5
Turn razor OFF.
Cleaning
C
◗
The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗
Regular cleaning guarantees better shaving
results.
◗
Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗
Never clean, remove or replace head
assembly while motor is on.
◗
Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗
Do not use razor if combs are damaged or
broken. Facial injury may occur.
Every Week: Razor Heads
◗
The easiest and most hygienic way to clean
the razor heads and hair chamber is to rinse
them after each use or at least once a week
with hot water: Water from the tap should
be on a hot setting, BUT BE CAREFUL TO
TEST WATER FIRST SO AS NOT TO BURN
OR SCALD HANDS.
