20
Your TV can be used as a computer monitor.
You must first of all connect the computer, adjust the resolution and refresh rate (see p. 10).
Notes:
- When using the TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under
electromagnetic interference environment but will not affect the performance of this product.
- For better performance, a good quality
HDMI/DVI/VGA
cable with good noise isolation filter is recommended.
Choosing PC-VGA mode
&
Press the
AV
key on the remote control to display the
Source list
.
é
Use the keys
oœ
to select
PC-VGA
and then press
π
to switch the TV to PC-VGA mode.
“
To return to TV mode, repeat steps
&
and
é
, but select
TV
instead.
Choosing PC-D mode
&
Press the
AV
key on the remote control to display the
Source list
.
é
Use the keys
oœ
to select
PC-D
and then press
π
to switch the TV to PC-D mode.
“
To return to TV mode, repeat steps
&
and
é
, but select
TV
instead.
Using the PC menus
Using in PC monitor mode
Press the
MENU
key to access the specific settings of the PC
monitor mode. Use the cursor keys to adjust them (the settings are
automatically saved).
Picture
•
Brightness/Contrast
: to adjust the brightness and contrast.
•
Horizontal/Vertical*
: to adjust the horizontal and vertical
placing of the image.
•
Colour Temp
: to adjust the colours (cool, normal or warm).
Audio selection
To choose the sound reproduced on the TV (
PC/HD
or
TV
).
Note:
- You must choose TV mode before going to PC/HD mode.
- To listen to the sound from a HD device in PC mode, take
care you also connected the audio cables to the HD device.
Features
•
Phase/Clock*
: eliminates the horizontal (
Phase
) and vertical
(
Clock
) interfering lines.
•
Format
: to choose between large screen (
Fullscreen
) or the
original (
Native
) format of the PC screens.
•
PIP
: change the Size and Position of the PIP window on the
screen when the
æ
key is used.
•
Auto adjust*
: position is set automatically.
Reset to Factory
To return to the factory settings.
* These adjustments are not available in PC-D mode.
PC menu
Picture
π
Brightness
Audio Selection Contrast
Features Horizontal
Reset to Factory Vertical
Colour Temp
Features
Phase
Clock
Format
PIP
Auto Adjust
2444.1 en 09-12-2005 11:50 Pagina 20