If a decoder or a descrambler is connected, see
p. 30, you can define one or more programme
numbers as decoder programme numbers.
&
Select
Decoder
with the cursor right.
é
Select
Programme
.
“
Select the programme number under which
you have stored the programme coming from
your decoder.
‘
Select
Status
.
• Select the input used to connect your
decoder:
None
or
EXT1
.
• Select
None
if you do not want the selected
programme number being activated as a
decoder programme number.
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 4, and
when you press the
v
key on the remote
control.
Centre input - Centre in volume
When you have connected a surround receiver to
the TV, see p. 32, the loudspeakers of the TV can
act as centre speaker, making a separate centre
speaker unnecessary.
Select
Centre input On
.
When having selected
On
, you can adjust the
Centre in volume
with the cursor left/right to
correct volume level differences of the external
audio receiver and speakers.
21
English
Set/Change code
The Child lock feature (see TV, Features, p. 26)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&
Select
Set/Change code
.
é
If no code exists yet, the menu item is set to
Set code
.
If a code has previously been entered, the menu
item is set to
Change code
. Follow the
instructions on screen.
Important:You have forgotten your code!
&
Select
Change code
in the General menu and
press
OK
.
é
Press the cursor right and enter the overriding
code 8-8-8-8.
“
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Source
EXT1
EXT2
EXT3
DVI-I
Side
Centre input
Centre in volume
Setup
Decoder
Programme
Status
Setup
Decoder
Source
24571.1 en.qxd 31-08-2005 11:59 Pagina 21
