16
Multi room
16.1
About Multi room
With Multi Room you can watch a TV programme that
comes from another TV in your home. The
programme is streamed from one TV to the other. You
can stream a programme to a TV that has no antenna
connection or has no Smart card subscription of its
own. You can also stream a recorded programme
from a TV with a connected Hard Drive.
The TV that streams the programme to the other TV,
must be switched on and must tune to the channel or
play the recording.
Streaming a TV programme with Multi Room will
reduce the picture resolution to 720p maximum. You
cannot stream radio channels. Some broadcasters
protect their programmes to prevent this kind of
streaming.
16.2
What you need
To stream a TV programme from one TV to another,
the programme must come from a digital TV channel.
Both TVs must be connected to your wireless home
network. For more information,
press
Keywords
and look up
Wireless Network
.
Make sure that both TVs have the setting
Switch on
with Wi-Fi (WoWLAN)
switched on in the TV setup.
To check this setting on this TV…
1 -
Press
, select
Network and press
(right)
to enter the menu.
2 -
Select
Switch on with Wi-Fi (WoWLAN)
and
press
OK
.
3 -
Select
On
and press
OK
.
4 -
Press
(left) repeatedly if necessary, to close
the menu.
16.3
Using Multi room
First time use
When you start Multi room for the first time, switch on
both TVs.
Once this TV made a connection with the other TV,
the other one will appear automatically in
the
Browse network
menu even when it's in
standby.
Stream a TV channel
With Multi room, you can watch the current TV
channel or open the channel list of the other TV. If
you select a channel from the list, the other TV will
also switch to the channel you selected. If the other
TV has a build-in satellite tuner with installed
channels or a connected Hard Disc Drive (HDD) with
recordings*, you can also watch these on this TV. You
cannot switch channels while the other TV is
recording or in Pause TV mode.
To watch a TV channel from the other TV . . .
1
- Make sure the other TV is switched on.
2
- On this TV, press
SOURCES
, select
Browse
network
and press
OK
.
3
- If the TV is not yet connected to your home
network, the network installation will start
automatically. If the TV is already connected, go to
step 4.
4
- In the
Browse network
menu, select the name
of the other TV and press
OK
. If you have several TVs
in your home, you might want to change the name of
the other TV. You can do that on the TV itself.
5
- Select what you want to watch from the other TV
. . .
• to watch the current channel of the other TV,
select
Current channel
and press
OK
.
• to open the channel list of the other TV,
select
Watch TV
and press
(Right).
• to open the satellite channel list of the other TV,
select
Watch satellite
and press
(Right).
• to open the list of recordings* on the other TV,
select
Watch recordings
and press
(Right).
• you can switch channels with
+
and
-
. You
cannot switch channels when the other TV is
recording or in Pause TV mode.
TV network name
If you have more than one TV in your home network,
you can give the TV a unique name.
To change the TV name…
1 -
Press
, select
Network
and press
(right)
to enter the menu.
2 -
Select
TV network name
and press
OK
.
3 -
Enter the name with the on-screen keyboard.
4 -
Select
Done
to confirm the change.
5 -
Press
(left) repeatedly if necessary, to close
the menu.
49
