Mechanical Instructions
4.
Figure 4-2 Cable dressing 42"
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal
Instructions below apply to the 42PFL5606S/98, but will be
similar for other models.
4.3.1
Rear Cover
Refer to
for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1.
Remove the fixation screws [1], [2] and [3] that secure the
rear cover. Refer to
for details.
2.
Lift the rear cover from the TV. Make sure that wires and
LVDS cable are not damaged while lifting the rear cover
from the set.
19170_101_110706.eps
110706
