ENGLISH
FRANÇAISE
ESP
AÑOL
EN-35
11.
Notes for the use of USB devices
Digital Content Issues
Only FAT (DOS) formatted (initialized) portable memory is
•
supported. Errors in this formatting can result in unreadable
content. If such problems appear try to re-format the card. Be
aware that formatting the card will also delete all the content on it
(pictures, music, …).
The following file types are supported: .jpg, .jpeg, .mp3, .alb, .m3u
•
and .pls.
Only linear JPEG picture formats are supported. Progressive JPEG
•
and JPEG2000 encodings are not supported.
The length of a filename or directory name is limited to the length
•
specified by the FAT16/32 file systems.
Max. levels of nested directories is 19.
•
Never use the supported file type extensions (.jpg, .jpeg, .mp3, .alb,
•
.m3u and .pls) as extensions for directories as these directories will
be treated as corrupted files.
The MP3 decoder does not support MPEG1 Layer 1 or Layer 2
•
playback.
MP3 Pro files can be played with normal MP3 quality.
•
The access and response time of the content on a device can differ
•
depending on the type or brand of the device.
The access and response time of the content on a device will
•
increase the more unsupported or corrupted files are on the
device.
Digital Camera Issues
If a USB connection between your digital camera and the TV isn’t
•
working, you can try the solutions below to resolve your problem.
Make sure your digital camera is switched on and verify if the
•
configuration of your digital camera is correct (see the manual of
your digital camera for more information).
Some digital cameras allow you to switch off the USB interface.
•
Make sure that the USB interface is switched on before connecting
to the TV.
If you have a digital camera with only internal memory (no
•
removable memory) you can try to copy the content manually to
a USB memory device (e.g. Philips KEY product) using a personal
computer.
Some digital cameras allow you to switch between PTP (Picture
•
Transfer Protocol) or “PC Link” and USB Mass Storage or “PC
Drive”. Make sure that you select USB Mass Storage or “PC
Drive” on your digital camera.
If your camera supports different interface settings be sure to try
•
them one by one or contact the reseller of your camera to find
out the correct setting.
USB Memory Device Issues
Devices connected to the USB port of your TV must be “Mass
•
Storage Class” compliant. If your device (digital camera. MP3
player, portable hard disk, …) is not “Mass Storage Class” compliant
it will not be detected by the content browser of the TV.
The following subsets of the Mass Storage Class specification are
•
supported:
The implementation of the TV is based on the “Universal Serial
•
Bus Mass Storage Class Specification Overview” (v1.2, June 23,
2003) including all documents referenced by the document. The
document can be found on the USB standardization website
(www.usb.org).
Full support of the USB Mass Storage Class Bulk-Only Transport
•
(bInterfaceProtocol = 50h).
Full support of SubClass Code = 05h; SFF-8070i spec.
•
Full support of SubClass Code = 06h; SCSI transparent
•
command set.
For large USB memory devices, when you are in the Content
•
Browser, it may take a long time before you can access your files.
When using a USB portable hard disk: Due to the high power
•
consumption of the hard disk, it is advised to use the external
power supply of the portable hard disk to guarantee proper
working under all conditions.
