1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Picture
and press
(right) to enter the
menu.
3 -
Select
Advanced
>
Sharpness
>
MPEG
Artifact Reduction
, and press
(right) to enter the
menu.
4 -
Select
Maximum
,
Medium
,
Minimum
or
Off
.
5 -
Press
(left) repeatedly if necessary, to close
the menu.
Motion Settings
Natural Motion
With
Natural Motion
, you can reduce the motion
judder visible in movies on TV. HD Natural Motion
makes any movement smooth and fluent.
To adjust the motion judder…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Picture
and press
(right) to enter the
menu.
3 -
Select
Advanced
>
Motion
>
Natural
Motion
, and press
OK
.
4 -
Select
Maximum
,
Medium
,
Minimum
or
Off
.
5 -
Press
(left) repeatedly if necessary, to close
the menu.
Picture Format
Basic
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen…
1 -
While watching a TV channel, press
.
2 -
Select
Picture Format
>
Fill Screen
or
Fit to
Screen
, and press
OK
.
3 -
Press
(left) repeatedly if necessary, to close
the menu.
•
Fill Screen
– automatically enlarges the picture to
fill the screen. Picture distortion is minimal, subtitles
remain visible. Not suitable for PC input. Some
extreme picture formats can still show black bars.
•
Fit to Screen
– automatically zooms in the picture
to fill the screen without distortion. Black bars may be
visible. Not suitable for PC input.
Advanced
If the two basic settings are inadequate to format the
picture you want, you can use the advanced settings.
With the advanced settings you manually format the
picture on your screen.
You can zoom, stretch and shift the picture until it
shows what you need – e.g. missing subtitles or
scrolling text banners . If you format the picture for a
specific Source – like a connected game console –
you can return to this setting the next time you use
the game console. The TV stores your last settings for
each connection.
To format the picture manually…
1 -
While watching a TV channel, press
.
2 -
Select
Advanced
and press
OK
.
3 -
Use
Shift
,
Zoom
,
Stretch
or
Original
to adjust
the picture. Select
Undo
to return to the setting the
picture had when you opened
Picture Format
.
•
Shift
– Select on the arrows to shift the picture. You
can only shift the picture when it is zoomed in.
•
Zoom
– Select on the arrows to zoom in.
•
Stretch
– Select on the arrows to stretch the
picture vertically or horizontally.
•
Undo
– Select to return to the picture format you
started with.
•
Original
– Shows the original format of the
incoming picture. This is a 1:1 pixel on pixel format.
Expert mode for HD and PC input.
Quick Picture Setting
During the first installation, you did some picture
settings in a few easy steps. You can redo these steps
with
Quick picture setting
. To do these steps, make
sure the TV can tune to a TV channel or can show a
program from a connected device.
To set the picture in a few easy steps…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
Picture
and press
(right) to enter the
menu.
3 -
Select
Advanced
>
Quick Picture Setting
, and
press
OK
.
4 -
Select
Start
.
5 -
Select the picture setting you prefer and go to the
next setting.
6 -
Finally, select
Finish
.
7 -
Press
(left) repeatedly if necessary, to close
the menu.
21.2
Sound
57
