Immersion
Settings > All settings
> Ambilight > Amhue > Immersion.
Press the arrows
(up) or
(down) to adjust
how accurate the Hue bulbs follow the Ambilight.
Lounge Light+hue
If you installed Amhue, you can let the hue
bulbs follow Lounge Light from Ambilight. The Philips
hue lamps will expand the Lounge Light effect across
the room.
Switch on/off the hue bulbs
Settings > All settings
> Ambilight > Amhue > Lounge light+hue.
View Configuration or Reset
View current setup of the Amhue, network,
Bridge and bulbs
Settings > All settings
> Ambilight > Amhue > View configuration.
Reset current setup of the Amhue
Settings > All settings
> Ambilight > Amhue > Reset
configuration.
Advanced Ambilight Settings
Neutralise the influence of a coloured wall on the
Ambilight colours
Settings > All settings
> Ambilight > Advanced > Wall colour.
Select the colour of the wall behind the TV and the TV
will modify the Ambilight colours to appear as they
are intended.
ISF Tuning
Settings > All settings
> Ambilight > Advanced >
ISF tuning.
Set Ambilight to switch off immediately or slowly
fade out when you switch off the TV
Settings > All settings > Ambilight > Advanced >
TV switch off.
14.4
Eco Settings
Set energy saving level
Settings > All settings > Eco settings > Energy
saving.
Select Maximum, Medium, or Minimum to have
different degress for energy saving, or select Off to
switch off energy saving mode.
Set screen off to save energy consumption
Settings > All settings > Eco settings > Screen
off.
Select Screen off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Switch on built-in ambient light sensor
Settings > All settings > Eco settings > Light
sensor.
Select Light sensor, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
Set TV switch off timer
Settings > All settings > Eco settings > Switch off
timer.
Press the arrows
(up) or
(down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the TV switches off
automatically to save energy.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receiving a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to
0
.
52
Summary of Contents for 43PUS7363
Page 44: ...Sources menu 44 ...