Philips 43PUT6801 User Manual Download

Page: 13 / 121

Channels

5.1

Antenna/Cable Installation

Update or reinstall

Update digital channels

You can always start an channel update yourself.

To start a channel update manually…

1 -

Press



, select

All Settings

and press

2 -

Select

Channels

Antenna/Cable Installation

3 -

Enter your PIN code if necessary.

4 -

Select

Search for Channels

5 -

Select

Start

6 -

Select

Update digital channels

7 -

Press

to update the digital channels. This

can take a few minutes.

8 -

Press



BACK

to close the menu.

Quick reinstall

Select Quick reinstall to install all channels again with
default settings.

To start Quick reinstall…

1 -

Press



, select

All Settings

and press

2 -

Select

Channels

Antenna/Cable Installation

3 -

Enter your PIN code if necessary.

4 -

Select

Search for Channels

5 -

Select

Start

6 -

Select

Quick reinstall

7 -

Press

to update the digital channels. This

can take a few minutes.

8 -

Press



BACK

to close the menu.

Advanced reinstall

You can reinstall all channels and leave all other TV
settings untouched.

If a PIN code is set, you will need to enter this code
before you can reinstall channels.

To reinstall channels…

Note:

Not support DVB-C.

1 -

Press



, select

All Settings

and press

2 -

Select

Channels

Antenna/Cable Installation

3 -

Enter your PIN code if necessary.

4 -

Select

Search for Channels

5 -

Select

Start

and press

OK.

6 -

Select

Advanced reinstall

and press

7 -

Select the country where you are now and

press

8 -

Select the type of installation you want,

Antenna

(DVB-T)

Cable (DVB-C)

and press

9 -

Select the type of channels you want,

Digital

and Analogue Channels

Only Digital

Channels

and press

10 -

Press

to update the digital channels. This

can take a few minutes.

11 -

Press



BACK to close the menu.

Automatic Channel Update

If you receive digital channels, you can set the TV to
automatically update these channels.

Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the Channels List and are marked with a



Channels without a signal are removed. The TV must
be in standby to automatically update channels. You
can switch off Automatic Channel Update.

To switch off the automatic update…

1 -

Press



, select

All Settings

and press

2 -

Select

Channels

Antenna/Cable Installation

3 -

Enter your PIN code if necessary.

4 -

Select

Automatic Channel Update

5 -

Select

Off

6 -

Press



(left) to go back one step or

press



BACK to close the menu.

When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.

To switch off the message…

1 -

Press



, select

All Settings

and press

2 -

Select

Channels

Antenna/Cable Installation

3 -

Enter your PIN code if necessary.

4 -

Select

Channel Update Message

5 -

Select

Off

6 -

Press



(left) to go back one step or

press



BACK to close the menu.

In certain countries, the Automatic channel update is
done while watching TV or on any moment when the
TV is in standby.

DVB-T or DVB-C

DVB-T Reception

During the channel installation, just before you search
for channels, you selected Antenna (DVB-T). Antenna
DVB-T searches for terrestrial analogue channels and
digital DVB-T2 channels.

Channel Number Conflicts