15
Recording and
Pause TV
15.1
Recording
What You Need
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV
Guide
• a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
In terms enforcement of copyright legislation, some
DVB providers can apply different restriction by
means of DRM (Digital Right Management)
technology. In case of broadcasting protected
channels, recording, record validity or number of
views may be restricted. Recording may be
completely prohibited. In case of trying to record a
protected broadcasting or play back an expired
recording, an error message can appear.
Record a Programme
Record Now
To record the programme you are watching right now,
press
(Record) on the remote control. The
recording will start immediately.
To stop the recording, press
(Stop).
When TV Guide data is available, the programme you
are watching will be recorded from the moment you
pressed the recording key until the programme
ends. If no TV Guide data is available, the recording
will only last 30 minutes. You can adjust the end time
of the recording in the list of
Recordings
.
Schedule a Recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away). The TV will use the data
from the TV Guide to start and end the recording.
To record a programme…
1 -
Press
TV GUIDE
.
2 -
Use navigation keys to select
Now
, and
press
OK
.
3 -
Select
Now
,
Later
,
Tomorrow
or the day you
need, and press
OK
or
BACK
to close the
menu.
4 -
Select the programme you wish to record,
press
OPTIONS
, select
Record
, and
press
OK
. The programme is scheduled for
recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a programme in your absence, remember to
leave the TV switched to Standby and the USB Hard
Drive switched on.
5 -
Press
BACK
to close the menu.
Recording Conflicts
When two scheduled recordings are overlapping in
time, there is a recording conflict. To solve a recording
conflict, you can adjust the start and end time of one
or both scheduled recordings.
To adjust the start or end time of a scheduled
recording…
1 -
Press
SOURCES
, and select
Recordings
.
2 -
At the top of the screen,
select
Scheduled
and press
OK
.
3 -
In the list of scheduled recordings and reminders,
select
Recordings
and press
OK
to view the
scheduled recordings only.
4 -
Select the scheduled recording that conflicts with
another scheduled recording and press
OPTIONS
.
5 -
Select
Adjust Time
, and press
OK
.
6 -
Select the start or end time and change the time
with the
(up) or
(down) keys.
Select
Apply
and press
OK
.
7 -
Press
BACK
to close the menu.
Auto End Margin
You can set the time margin that the TV will add
automatically at the end of each scheduled recording.
To set the automatic end time margin…
1 -
Press
SOURCES
, and select
Recordings
.
2 -
Use navigation keys to select
at the upper right
corner and press
OK
.
3 -
Select
Auto End Margin
and press
OK
.
4 -
Press
(up) or
(down) and press
OK
to
set the time margin added to a recording
automatically. You can add up to 45 minutes to a
recording.
5 -
Press
BACK
to close the menu.
65
