7
EN
English
5
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or
the help section in the "
Clean
Home+
" App for extensive and
up-to-date troubleshooting tips.
Note
•
This instruction is only valid
when the air purifier is being
set up for the first time. If the
network has changed or the
setup needs to be performed
again, consult section "Reset
the Wi-Fi connection" on
page 7.
•
If you want to connect more
than one air purifier to your
smartphone or tablet, you have
to do this one by one. Complete
the set up of one air purifier
before you turn on the other air
purifier.
•
Make sure that the distance
between your smartphone
or tablet and the air purifier
is less than 10 m without any
obstructions.
•
This App supports the
latest versions of Android
and iOS. Please check
www.philips.com/cleanhome for
the latest update of supported
operating systems and devices.
Reset the Wi-Fi connection
Note
•
This applies when the default
network to which your purifier is
connected has changed.
•
Reset the Wi-Fi connection
when your default network has
changed.
1
Put the plug of the air purifier in
the power socket and touch
to turn on the air purifier.
2
Touch and simultaneously
for 3 seconds until you hear a
beep.
»
The air purifier goes to
pairing mode.
»
The Wi-Fi indicator
blinks
orange.
3
Follow the steps 4-5 in
"Setting
up the Wi-Fi connection for the
first time"
section.
