Accented Letters and Symbols
Accented characters and symbols are not directly
available on the Remote Control Keyboard.
To type such a character, you can open the On-
screen keyboard.
To open the on-screen keyboard, press
Ω
on the
back of remote control. In the on-screen keyboard,
you can navigate to the character you need. Switch
the keyboard layout with the color keys. Press
OK
to
enter a character. The on-screen keyboard
disappears when you press a character on the
Remote Control Keyboard.
6.3
IR Sensor
The remote control of the TV uses BT (bluetooth) to
send its commands to the TV. With BT, you do not
need to point the remote control at the TV.
However, the TV can also receive commands from a
remote control that uses IR (infrared) to send
commands. If you use such a remote control, always
make sure you point the remote control at the
infrared sensor on the front of the TV.
6.4
Batteries
The TV will notify you when the battery power of the
remote control is low.
To replace the batteries, open the battery
compartment on the keyboard side of the remote
control.
1 -
Use a small coin or other small, blunt object and
press the rectangular shaped release button to open
the battery lid.
2 -
Replace the old batteries with 2
type
AA-LR6-1.5V
alkaline batteries. Make sure the
+ and the - ends of the batteries line up correctly.
3 -
Reposition the battery door and push it down
until it clicks.
Put the remote control down for about 15 seconds to
calibrate the pointer.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
For more information, press
Keywords
and look
up
End of use
.
6.5
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
27
