Philips 55OLED876 User Manual Download

Page: 23 / 96

Manual Channel Update

You can always start an channel update yourself.

To start a channel update manually…

1 -

Select



Settings

Channels

Antenna/Cable

Installation

Antenna Installation

and press

2 -

Enter your PIN code if necessary.

3 -

Select

Search for Channels

and press

4 -

Select

Start

and press

5 -

Select

Update Digital Channels

select

and press

6 -

Select

Start

and press

to update the digital

channels. This can take a few minutes.

7 -

Press



(left) to go back one step or

press



Back

to close the menu.

Reinstall Channels

Reinstall All Channels

You can reinstall all channels and leave all other TV
settings untouched.

If a PIN code is set, you will need to enter this code
before you can reinstall channels.

To reinstall channels…

1 -

Select



Settings

Channels

Antenna/Cable

Installation or Antenna Installation

and press

2 -

Enter your PIN code if necessary.

3 -

Select

Search for Channels

and press

4 -

Select

Start

and press

OK.

5 -

Select

Reinstall Channels

, select

and

press

6 -

Select the country where you are now and

press

7 -

Select

and press

8 -

Select the type of installation you want,

Antenna

(DVB-T)

Cable (DVB-C)

and press

7 -

Select

and press

10 -

Select the type of channels you want,

Digital

and Analogue Channels

Only Digital

Channels

and press

7 -

Select

and press

12 -

Select

Start

and press

to update the

digital channels. This can take a few minutes.

13 -

Press



(left) to go back one step or

press



Back

to close the menu.

Reinstall TV

You can redo a full TV installation. The TV is
completely reinstalled.

To redo a full TV installation…

1 -

Select



Settings

General Settings

Reinstall

and press

2 -

Enter your PIN code if necessary.

3 -

Select

Yes

and press

to confirm.

4 -

The TV will reinstall completely. All settings will

be reset and installed channels will be replaced. The
installation can take a few minutes.

5 -

Press



(left) to go back one step or

press



Back

to close the menu.

DVB Settings

DVB-T or DVB-C Reception

During the channel installation, just before you search
for channels, you selected Antenna (DVB-T) or Cable
(DVB-C). Antenna DVB-T searches for terrestrial
analogue channels and digital DVB-T/T2 channels.
Cable DVB-C searches for analogue and digital
channels available from a cable DVB-C operator.

DVB-C Channel Installation

For ease of use, all DVB-C settings are set to
automatic.
If your DVB-C operator gave you specific DVB-C
values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.

Channel Number Conflicts

In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
number conflicts. You need to select which TV
channel you want to install on a channel number with
multiple TV channels.

Network Frequency Mode

If you intend to use the fast

Quick Scan

method

Frequency Scan

to search for channels,

select

Automatic

. The TV will use 1 of the predefined

network frequencies (or HC - homing channel) as
used by most cable operator in your country.

If you received a specific network frequency value to
search for channels, select

Manual